eclipse094

Всем привет.
Asus tuf a15 FA506NF (2021)
Ryzen 5 7535hs
RTX 2050 (Редкая видеокарта, встречается только в ноутбуках)
Отрыгнул subvendor id у rtx 2050. Смотрели родной дамп вбиоса - сабвендор имеется. Пробовал прошивать родной дамп вбиоса программой nvflash, все бы ничего,прошивка идет.. но сабвендор не меняется, как были нули так они и остались. Ситуация очень необычная, из-за отсутствующего сабвендора не ставятся драйвера nvidia,только вручную с костылем.
Также пробовал понижать версию биоса 305 до 303, результата не дало(
ссылка на дамп вбиоса: https://drive.google...нчмарке.</span>

Доброго времени суток, что посоветуете взять для дома так сказать, в этом деле я ещё селеный но так посмотрел на IPollo X1 мощностью 300Mh/s, но не знаю может есть что-то лучше для дома, был бы рад увидеть все варианты

Ищу помощи. Два асика Antminer S19. Стоят в помещении с температурой не более +5-7 градусов. Один-два раза в сутки отключаются от пула, помогает перезагрузка. Перегрев исключен. Стоят два вместе друг с другом, без шум бокса. Без стабилизаторов. Скидываю Логи. Согласно сообщению от пула отключились в 17:50

 

[    0.000000@0] Booting Linux on physical CPU 0x0

[    0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Jun 9 13:22:51 CST 2022

[    0.000000@0] Boot CPU: AArch64 Processor [410fd034]

[    0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')

[    0.000000@0] bootconsole [aml_uart0] enabled

[    0.000000@0] efi: Getting EFI parameters from FDT:

[    0.000000@0] efi: UEFI not found.

[    0.000000@0] 07400000 - 07500000,     1024 KB, ramoops@0x07400000

[    0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB

[    0.000000@0] 05000000 - 05400000,     4096 KB, linux,secmon

[    0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000

[    0.000000@0] On node 0 totalpages: 65536

[    0.000000@0]   DMA zone: 1024 pages used for memmap

[    0.000000@0]   DMA zone: 0 pages reserved

[    0.000000@0]   DMA zone: 65536 pages, LIFO batch:15

[    0.000000@0] psci: probing for conduit method from DT.

[    0.000000@0] psci: PSCIv1.0 detected in firmware.

[    0.000000@0] psci: Using standard PSCI v0.2 function IDs

[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.

[    0.000000@0] psci: SMC Calling Convention v1.1

[    0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400

[    0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096

[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

[    0.000000@0] Detected VIPT I-cache on CPU0

[    0.000000@0] CPU features: enabling workaround for ARM erratum 845719

[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64512

[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init

[    0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)

[    0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)

[    0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.000000@0] Memory: 211704K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29960K reserved, 20480K cma-reserved)

[    0.000000@0] Virtual kernel memory layout:

[    0.000000@0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)

[    0.000000@0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)

[    0.000000@0]       .text : 0xffffff8009080000 - 0xffffff8009910000   (  8768 KB)

[    0.000000@0]     .rodata : 0xffffff8009910000 - 0xffffff8009b80000   (  2496 KB)

[    0.000000@0]       .init : 0xffffff8009b80000 - 0xffffff8009f10000   (  3648 KB)

[    0.000000@0]       .data : 0xffffff8009f10000 - 0xffffff800a03aa00   (  1195 KB)

[    0.000000@0]        .bss : 0xffffff800a03aa00 - 0xffffff800a139034   (  1018 KB)

[    0.000000@0]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)

[    0.000000@0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)

[    0.000000@0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)

[    0.000000@0]               0xffffffbf00000000 - 0xffffffbf00400000   (     4 MB actual)

[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)

[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000@0] Preemptible hierarchical RCU implementation.

[    0.000000@0] Build-time adjustment of leaf fanout to 64.

[    0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.

[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000@0] NR_IRQS:64 nr_irqs:64 0

[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized

[    0.000000@0] axg_aoclkc_init: register ao clk ok!

[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk

[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk

[    0.000000@0] axg_amlogic_init_media: register meson media clk

[    0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks

[    0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk

[    0.000000@0] axg_clkc_init initialization complete

[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).

[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

[    0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

[    0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194

[    0.016898@0] Console: colour dummy device 80x25

[    0.021107@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)

[    0.031587@0] pid_max: default: 32768 minimum: 301

[    0.036435@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0

[    0.045773@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000

[    0.056006@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]

[    0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]

[    0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]

[    0.074904@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]

[    0.081204@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]

[    0.087504@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]

[    0.093804@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]

[    0.100104@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]

[    0.106463@0] Security Framework initialized

[    0.110696@0] SELinux:  Initializing.

[    0.114388@0] SELinux:  Starting in permissive mode

[    0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

[    0.121107@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)

[    0.128840@0] ftrace: allocating 30061 entries in 118 pages

[    0.186309@0] sched-energy: CPU device node has no sched-energy-costs

[    0.187121@0] CPU0: update cpu_capacity 1024

[    0.191447@0] ASID allocator initialised with 32768 entries

[    0.229587@0] secmon: can't fine clear_range

[    0.229792@0] EFI services will not be available.

[    0.233059@0] Meson chip version = RevC (25:C - 23:0)

[    0.266724@1] Detected VIPT I-cache on CPU1

[    0.266783@1] CPU1: update cpu_capacity 1024

[    0.266785@1] CPU1: Booted secondary processor [410fd034]

[    0.294792@2] Detected VIPT I-cache on CPU2

[    0.294844@2] CPU2: update cpu_capacity 1024

[    0.294846@2] CPU2: Booted secondary processor [410fd034]

[    0.322863@3] Detected VIPT I-cache on CPU3

[    0.322913@3] CPU3: update cpu_capacity 1024

[    0.322915@3] CPU3: Booted secondary processor [410fd034]

[    0.323005@0] Brought up 4 CPUs

[    0.362224@0] SMP: Total of 4 processors activated.

[    0.367133@0] CPU features: detected feature: 32-bit EL0 Support

[    0.373169@0] CPU features: detected feature: Kernel page table isolation (KPTI)

[    0.383723@0] CPU: All CPU(s) started at EL2

[    0.384909@0] alternatives: patching kernel code

[    0.390205@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755

[    0.397436@0] devtmpfs: initialized

[    0.412446@0] DMI not present or invalid.

[    0.412847@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.420808@0] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.427387@0] pinctrl core: initialized pinctrl subsystem

[    0.433789@0] NET: Registered protocol family 16

[    0.457340@0] cpuidle: using governor menu

[    0.457831@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)

[    0.463441@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.

[    0.470863@2] DMA: preallocated 256 KiB pool for atomic allocations

[    0.476964@2] clkmsr: clkmsr: driver init

[    0.481070@2] aml_watch_point_probe, in, wp:2

[    0.485617@2] pstore: using zlib compression

[    0.489900@2] console [pstore-1] enabled

[    0.493326@2] pstore: Registered ramoops as persistent store backend

[    0.499734@2] ramoops: attached 0x100000@0x7400000, ecc: 0/0

[    0.514082@2] aml_iomap: amlogic iomap probe done

[    0.520898@2] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c

[    0.522817@2] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0

[    0.623016@2] usbcore: registered new interface driver usbfs

[    0.623185@2] usbcore: registered new interface driver hub

[    0.628784@2] usbcore: registered new device driver usb

[    0.634093@2] pps_core: LinuxPPS API ver. 1 registered

[    0.639016@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>

[    0.648412@2] PTP clock support registered

[    0.652758@2] dmi: Firmware registration failed.

[    0.657710@2] secmon: reserve_mem_size:0x300000

[    0.661780@2] secmon secmon: assigned reserved memory node linux,secmon

[    0.668677@2] secmon: get page:ffffffbf00140000, 5000

[    0.673399@2] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000

[    0.681782@2] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000

[    0.689658@2] NetLabel: Initializing

[    0.691830@2] NetLabel:  domain hash size = 128

[    0.696405@2] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.701658@2] NetLabel:  unlabeled traffic allowed by default

[    0.708249@2] clocksource: Switched to clocksource arch_sys_counter

[    0.834934@2] VFS: Disk quotas dquot_6.6.0

[    0.835083@2] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.861140@3] NET: Registered protocol family 2

[    0.862196@3] TCP established hash table entries: 2048 (order: 2, 16384 bytes)

[    0.867397@3] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)

[    0.874108@3] TCP: Hash tables configured (established 2048 bind 2048)

[    0.880635@3] UDP hash table entries: 256 (order: 1, 8192 bytes)

[    0.886599@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    0.893334@3] NET: Registered protocol family 1

[    0.898280@3] RPC: Registered named UNIX socket transport module.

[    0.903731@3] RPC: Registered udp transport module.

[    0.908621@3] RPC: Registered tcp transport module.

[    0.913509@3] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.922682@3] Unpacking initramfs...

[    1.421098@3] Initramfs unpacking failed: junk in compressed archive

[    1.427858@3] Freeing initrd memory: 6556K

[    1.428805@3] hw perfevents: clusterb_enabled = 0

[    1.431038@3] hw perfevents: cpumasks 0xf, 0x0

[    1.435582@3] hw perfevents: cluster A irq = 7

[    1.440146@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available

[    1.450249@3] audit: initializing netlink subsys (disabled)

[    1.453642@3] audit: type=2000 audit(1.312:1): initialized

[    1.460965@3] workingset: timestamp_bits=62 max_order=16 bucket_order=0

[    1.485108@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    1.487984@0] NFS: Registering the id_resolver key type

[    1.490864@0] Key type id_resolver registered

[    1.495161@0] Key type id_legacy registered

[    1.499805@0] fuse init (API version 7.26)

[    1.505203@0] SELinux:  Registering netfilter hooks

[    1.511529@0] NET: Registered protocol family 38

[    1.511590@0] Key type asymmetric registered

[    1.514847@0] Asymmetric key parser 'x509' registered

[    1.520350@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)

[    1.527628@0] io scheduler noop registered (default)

[    1.532498@0] io scheduler deadline registered

[    1.537303@0] io scheduler cfq registered

[    1.557612@1] random: fast init done

[    1.557709@1] random: crng init done

[    1.558156@0] Unable to detect cache hierarchy for CPU 0

[    1.598513@0] loop: module loaded

[    1.603993@0] zram: Added device: zram0

[    1.604480@0] mtdoops: mtd device (mtddev=name/number) must be supplied

[    1.609587@0] libphy: Fixed MDIO Bus: probed

[    1.614420@0] tun: Universal TUN/TAP device driver, 1.6

[    1.618429@0] tun: © 1999-2004 Max Krasnyansky <[email protected]>

[    1.626591@0]  ee eth reset:Addr = ffffff80081fd008

[    1.634121@0] meson6-dwmac ff3f0000.ethernet: no reset control found

[    1.636051@0] stmmac - user ID: 0x11, Synopsys ID: 0x37

[    1.641328@0]  Ring mode enabled

[    1.644562@0]  DMA HW capability register supported

[    1.649275@0]  Normal descriptors

[    1.652606@0]  RX Checksum Offload Engine supported

[    1.657499@0] COE Type 2

[    1.660106@0]  TX Checksum insertion supported

[    1.664589@0]  Wake-Up On Lan supported

[    1.668528@0]  Enable RX Mitigation via HW Watchdog Timer

[    1.681961@0] libphy: stmmac: probed

[    1.682012@0] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active

[    1.688488@0] PPP generic driver version 2.4.2

[    1.691403@0] PPP BSD Compression module registered

[    1.695949@0] PPP Deflate Compression module registered

[    1.701197@0] PPP MPPE Compression module registered

[    1.706170@0] NET: Registered protocol family 24

[    1.711628@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.717568@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.724649@0] usbcore: registered new interface driver cdc_acm

[    1.729800@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    1.738240@0] usbcore: registered new interface driver usbserial

[    1.744904@0] mousedev: PS/2 mouse device common for all mice

[    1.750331@0] usbcore: registered new interface driver xpad

[    1.755754@0] i2c /dev entries driver

[    1.760475@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized

[    1.764756@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi

[    1.775662@0] ff803000.serial: clock gate not found

[    1.777315@0] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000

[    1.784504@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart

[    1.799420@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200

[    1.802123@0] console [ttyS0] enabled

[    1.809350@0] bootconsole [aml_uart0] disabled

[    1.818998@3] ff804000.serial: clock gate not found

[    1.823123@3] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000

[    1.830244@3] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart

[    1.840635@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000

[    1.846728@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart

[    1.856918@0] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000

[    1.863211@0] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart

[    1.874115@3] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000

[    1.883490@3] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port

[    1.889959@3] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080

[    1.905029@0] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40

[    1.908793@0] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40

[    1.921156@0] aml_dma ff63e000.aml_dma: Aml dma

[    1.924186@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma

[    1.929397@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma

[    1.935619@0] efusekeynum: 4

[    1.938005@0] efusekeyname:             mac offset:     0 size:     6

[    1.944395@0] efusekeyname:          mac_bt offset:     6 size:     6

[    1.950818@0] efusekeyname:        mac_wifi offset:    12 size:     6

[    1.957227@0] efusekeyname:            usid offset:    18 size:    16

[    1.964063@1] efuse efuse: probe OK!

[    1.969630@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller

[    1.976749@1] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode 

[    1.981800@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80

[    1.987033@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c

[    2.032390@1] meson-mmc: meson_mmc_probe() : success!

[    2.032645@1] amlogic mtd driver init

[    2.036723@1] prase_get_dtb_nand_parameter:128,parse dts start

[    2.041476@1] bl mode descrete

[    2.044342@1] fip_copies 4

[    2.047006@1] fip_size 0x200000

[    2.050146@1] nand_clk_ctrl 0xffe07000

[    2.053870@1] prase_get_dtb_nand_parameter:234,parse dts end

[    2.059536@1] nand_clk_ctrl 0xffe07000

[    2.063258@1] nand register base ffffff80083df800, nand clock register ffffff80083e1000

[    2.071993@1] plat->aml_nand_device ffffff800a005c10

[    2.076174@1] m3_nand_probe() aml_nand_device ffffff800a005c10

[    2.082225@1] NAND device id: 2c da 90 95 6 0

[    2.086293@1] NAND device: Manufacturer ID: 

[    2.090358@1]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)

[    2.097402@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14

[    2.102835@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16

[    2.108384@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1

[    2.114629@1] mtd->oobavail: 0x8

[    2.118041@1] aml_nand_init 2119: plat-name:bootloader

[    2.122949@1] Creating 1 MTD partitions on "bootloader":

[    2.128251@1] 0x000000000000-0x000000200000 : "bootloader"

[    2.137341@0] bootloader initialized ok

[    2.137496@0] plat->aml_nand_device ffffff800a005c10

[    2.142481@0] m3_nand_probe() aml_nand_device ffffff800a005c10

[    2.148610@0] NAND device id: 2c da 90 95 6 0

[    2.152615@0] NAND device: Manufacturer ID: 

[    2.156662@0]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)

[    2.163704@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14

[    2.169137@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16

[    2.174688@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1

[    2.180931@0] mtd->oobavail: 0x8

[    2.184350@0] aml_nand_init 2119: plat-name:nandnormal

[    2.189302@0] bbt_start=20

[    2.191910@0] env_start=24

[    2.194626@0] key_start=32

[    2.197303@0] dtb_start=40

[    2.199969@0] ddr_start=44

[    2.202679@0] nbbt: info size=0x800 max_scan_blk=24, start_blk=20

[    2.209173@0] get_free_node 43: bitmap=0

[    2.212644@0] get_free_node 55: bitmap=1

[    2.216735@0] get_free_node 43: bitmap=1

[    2.220443@0] get_free_node 55: bitmap=3

[    2.224534@0] get_free_node 43: bitmap=3

[    2.228224@0] get_free_node 55: bitmap=7

[    2.232126@0] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1

[    2.238813@0] nbbt free list:

[    2.241761@0] blockN=21, ec=-1, dirty_flag=0

[    2.246007@0] blockN=22, ec=-1, dirty_flag=0

[    2.250254@0] blockN=23, ec=-1, dirty_flag=0

[    2.254500@0] aml_nand_scan_rsv_info 1141: page_num=1

[    2.259910@0] nbbt valid addr: 280000

[    2.263171@0] aml_nand_bbt_check 1306 bbt is valid, reading.

[    2.268813@0] aml_nand_read_rsv_info:423,read nbbt info at 280000

[    2.275065@0] nenv: info size=0x10000 max_scan_blk=32, start_blk=24

[    2.281491@0] get_free_node 43: bitmap=7

[    2.285009@0] get_free_node 55: bitmap=f

[    2.289100@0] get_free_node 43: bitmap=f

[    2.292808@0] get_free_node 55: bitmap=1f

[    2.296987@0] get_free_node 43: bitmap=1f

[    2.300782@0] get_free_node 55: bitmap=3f

[    2.304961@0] get_free_node 43: bitmap=3f

[    2.308756@0] get_free_node 55: bitmap=7f

[    2.312933@0] get_free_node 43: bitmap=7f

[    2.316729@0] get_free_node 55: bitmap=ff

[    2.320907@0] get_free_node 43: bitmap=ff

[    2.324702@0] get_free_node 55: bitmap=1ff

[    2.328967@0] get_free_node 43: bitmap=1ff

[    2.332848@0] get_free_node 55: bitmap=3ff

[    2.336922@0] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1

[    2.343593@0] nenv free list:

[    2.346541@0] blockN=25, ec=-1, dirty_flag=0

[    2.350787@0] blockN=26, ec=-1, dirty_flag=0

[    2.355034@0] blockN=27, ec=-1, dirty_flag=0

[    2.359280@0] blockN=28, ec=-1, dirty_flag=0

[    2.363527@0] blockN=29, ec=-1, dirty_flag=0

[    2.367774@0] blockN=30, ec=-1, dirty_flag=0

[    2.372020@0] blockN=31, ec=-1, dirty_flag=0

[    2.376267@0] aml_nand_scan_rsv_info 1141: page_num=32

[    2.393531@0] nenv valid addr: 310000

[    2.393565@0] nkey: info size=0x8000 max_scan_blk=40, start_blk=32

[    2.397928@0] get_free_node 43: bitmap=3ff

[    2.401810@0] get_free_node 55: bitmap=7ff

[    2.406075@0] get_free_node 43: bitmap=7ff

[    2.409956@0] get_free_node 55: bitmap=fff

[    2.414221@0] get_free_node 43: bitmap=fff

[    2.418103@0] get_free_node 55: bitmap=1fff

[    2.422455@0] get_free_node 43: bitmap=1fff

[    2.426424@0] get_free_node 55: bitmap=3fff

[    2.430775@0] get_free_node 43: bitmap=3fff

[    2.434743@0] get_free_node 55: bitmap=7fff

[    2.439094@0] get_free_node 43: bitmap=7fff

[    2.443064@0] get_free_node 55: bitmap=ffff

[    2.447414@0] get_free_node 43: bitmap=ffff

[    2.451381@0] get_free_node 55: bitmap=1ffff

[    2.455822@0] get_free_node 43: bitmap=1ffff

[    2.459876@0] get_free_node 55: bitmap=3ffff

[    2.464123@0] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0

[    2.470794@0] nkey free list:

[    2.473742@0] blockN=32, ec=-1, dirty_flag=0

[    2.477988@0] blockN=33, ec=-1, dirty_flag=0

[    2.482234@0] blockN=34, ec=-1, dirty_flag=0

[    2.486481@0] blockN=35, ec=-1, dirty_flag=0

[    2.490728@0] blockN=36, ec=-1, dirty_flag=0

[    2.494974@0] blockN=37, ec=-1, dirty_flag=0

[    2.499221@0] blockN=38, ec=-1, dirty_flag=0

[    2.503468@0] blockN=39, ec=-1, dirty_flag=0

[    2.507715@0] aml_nand_scan_rsv_info 1141: page_num=16

[    2.512828@0] nkey valid addr: fffffffffffe0000

[    2.517333@0] aml_nand_key_check 1251 NO key exist

[    2.522103@0] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40

[    2.528731@0] get_free_node 43: bitmap=3ffff

[    2.532590@0] get_free_node 55: bitmap=7ffff

[    2.537026@0] get_free_node 43: bitmap=7ffff

[    2.541084@0] get_free_node 55: bitmap=fffff

[    2.545521@0] get_free_node 43: bitmap=fffff

[    2.549576@0] get_free_node 55: bitmap=1fffff

[    2.553909@0] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1

[    2.560580@0] ndtb free list:

[    2.563511@0] blockN=41, ec=-1, dirty_flag=0

[    2.567774@0] blockN=42, ec=-1, dirty_flag=0

[    2.572021@0] blockN=43, ec=-1, dirty_flag=0

[    2.576268@0] aml_nand_scan_rsv_info 1141: page_num=64

[    2.593513@0] ndtb valid addr: 500000

[    2.593546@0] nddr: info size=0x20000 max_scan_blk=46, start_blk=44

[    2.597989@0] get_free_node 43: bitmap=1fffff

[    2.602137@0] get_free_node 55: bitmap=3fffff

[    2.606656@0] get_free_node 43: bitmap=3fffff

[    2.610798@0] get_free_node 55: bitmap=7fffff

[    2.615131@0] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0

[    2.621801@0] nddr free list:

[    2.624749@0] blockN=44, ec=-1, dirty_flag=0

[    2.628995@0] blockN=45, ec=-1, dirty_flag=0

[    2.633243@0] aml_nand_scan_rsv_info 1141: page_num=64

[    2.638356@0] nddr valid addr: fffffffffffe0000

[    2.642862@0] aml_nand_ddr_check 1281 NO ddr exist

[    2.647632@0] tpl: off 8388608, size 8388608

[    2.779559@0] Creating 6 MTD partitions on "nandnormal":

[    2.779606@0] 0x000000800000-0x000001000000 : "tpl"

[    2.791051@3] 0x000001000000-0x000001200000 : "misc"

[    2.794335@1] 0x000001200000-0x000002200000 : "recovery"

[    2.806203@0] 0x000002200000-0x000004200000 : "boot"

[    2.825358@0] 0x000004200000-0x000004700000 : "config"

[    2.829957@0] 0x000004700000-0x000010000000 : "nvdata"

[    2.930721@3] nandnormal initialized ok

[    2.930829@3] aml_ubootenv_init: register env chardev

[    2.934656@3] aml_ubootenv_init: register env chardev OK

[    2.939408@3] amlnf_dtb_init: register dtb cdev

[    2.944153@2] amlnf_dtb_init: register dtd cdev OK

[    2.948632@2] mtd_nand_probe 267 , err = 0

[    2.953838@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0

[    2.959137@3] input: aml_vkeypad as /devices/platform/rtc/input/input0

[    2.966138@2] unifykey: storage in base: 0xffffffc005000000

[    2.970768@2] unifykey: storage out base: 0xffffffc005040000

[    2.976376@2] unifykey: storage block base: 0xffffffc005080000

[    2.982170@2] unifykey: probe done!

[    2.986336@2] unifykey: no efuse-version set, use default value: -1

[    2.991886@2] unifykey: key unify config unifykey-num is 6

[    2.997406@2] unifykey: key unify fact unifykey-num is 6

[    3.002623@2] unifykey: unifykey_devno: f200000

[    3.007612@0] unifykey: device unifykeys created ok

[    3.012114@0] unifykey: aml_unifykeys_init done!

[    3.017009@0] sysled: module init

[    3.020492@0] meson_wdt ffd0f0d0.watchdog: start watchdog

[    3.025282@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog

[    3.032700@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done

[    3.041336@0] dmc_monitor_probe

[    3.047688@0] defendkey defendkey: Reserved memory is not enough!

[    3.048180@0] defendkey: probe of defendkey failed with error -22

[    3.054567@0] GACT probability NOT on

[    3.057908@0] Mirror/redirect action on

[    3.061712@0] u32 classifier

[    3.064549@0]     Actions configured

[    3.068092@0] Netfilter messages via NETLINK v0.30.

[    3.073385@0] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)

[    3.079584@0] ctnetlink v0.93: registering with nfnetlink.

[    3.085434@0] xt_time: kernel timezone is -0000

[    3.089165@0] ipip: IPv4 and MPLS over IPv4 tunneling driver

[    3.095796@0] ip_tables: © 2000-2006 Netfilter Core Team

[    3.100526@0] arp_tables: arp_tables: © 2002 David S. Miller

[    3.105976@0] Initializing XFRM netlink socket

[    3.111511@0] NET: Registered protocol family 10

[    3.117470@0] mip6: Mobile IPv6

[    3.118056@0] ip6_tables: © 2000-2006 Netfilter Core Team

[    3.124034@0] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

[    3.131985@0] NET: Registered protocol family 17

[    3.134307@0] NET: Registered protocol family 15

[    3.138902@0] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.

[    3.152042@0] l2tp_core: L2TP core driver, V2.0

[    3.156440@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0

[    3.161358@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)

[    3.167112@0] l2tp_netlink: L2TP netlink interface

[    3.171923@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)

[    3.177986@0] l2tp_debugfs: L2TP debugfs support

[    3.182517@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)

[    3.189155@0] NET: Registered protocol family 35

[    3.194087@0] Key type dns_resolver registered

[    3.198645@0] Registered swp emulation handler

[    3.202547@0] Registered cp15_barrier emulation handler

[    3.207737@0] Registered setend emulation handler

[    3.212482@0] disable EAS feature

[    3.217075@1] registered taskstats version 1

[    3.233740@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host

[    3.740160@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller

[    3.740299@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1

[    3.748543@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010

[    3.756952@2] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000

[    3.764540@0] hub 1-0:1.0: USB hub found

[    3.766879@0] hub 1-0:1.0: 1 port detected

[    3.771540@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller

[    3.776561@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2

[    3.784443@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[    3.793907@1] hub 2-0:1.0: USB hub found

[    3.796559@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)

[    3.803832@1] usb usb2: Unsupported the hub

[    3.808611@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)

[    3.816688@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d1ab800)

[    3.816765@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0

[    3.824646@1] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000

[    3.824659@1] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00b918c00

[    3.925233@1] dwc_otg: Core Release: 3.10a

[    3.925290@1] dwc_otg: Setting default values for core params

[    3.929476@1] dwc_otg: curmode: 0, host_only: 0

[    3.933979@1] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT

[    3.946493@1] dwc_otg: Using Buffer DMA mode

[    3.946531@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1

[    3.950440@1] dwc_otg: Working on port type = SLAVE

[    3.955296@1] dwc_otg: Dedicated Tx FIFOs mode

[    3.962246@1] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22

[    3.969010@1] cpucore_cooling_register, max_cpu_core_num:4

[    3.981168@0] gxbb_pm: enter meson_pm_probe!

[    3.981225@0] no vddio3v3_en pin

[    3.982878@0] pm-meson aml_pm: Can't get switch_clk81

[    3.987979@0] gxbb_pm: meson_pm_probe done

[    3.992981@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200

[    3.999329@0] Freeing unused kernel memory: 3648K

[    4.013533@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200

[    4.273227@1] ubi0: attaching mtd5

[    4.291800@1] ubi0: scanning is finished

[    4.296810@0] ubi0: attached mtd5 (name "config", size 5 MiB)

[    4.296941@0] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

[    4.303989@0] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

[    4.310905@0] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

[    4.318011@0] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0

[    4.324088@0] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

[    4.331447@0] ubi0: max/mean erase counter: 10/5, WL threshold: 4096, image sequence number: 2387648172

[    4.340813@0] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4

[    4.350009@1] ubi0: background thread "ubi_bgt0d" started, PID 1077

[    4.362972@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1081

[    4.379614@3] UBIFS (ubi0:0): recovery needed

[    4.422901@3] UBIFS (ubi0:0): recovery completed

[    4.423205@3] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"

[    4.429910@3] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[    4.439948@3] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)

[    4.450169@3] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)

[    4.456759@3] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 0DB05EC9-D50A-4A09-A132-5641464966CA, small LPT model

[    4.481239@2] ubi2: attaching mtd6

[    5.154396@2] ubi2: scanning is finished

[    5.161429@3] ubi2: attached mtd6 (name "nvdata", size 185 MiB)

[    5.161727@3] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

[    5.168858@3] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

[    5.175705@3] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096

[    5.182798@3] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0

[    5.189046@3] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128

[    5.196420@3] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 537201870

[    5.205600@3] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4

[    5.215060@2] ubi2: background thread "ubi_bgt2d" started, PID 1088

[    5.228140@0] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1093

[    5.244806@3] UBIFS (ubi2:0): recovery needed

[    5.324526@1] UBIFS (ubi2:0): recovery completed

[    5.324827@1] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data"

[    5.331531@1] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[    5.341575@1] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)

[    5.352404@1] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)

[    5.359167@1] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID D256940D-DC3F-4010-A1BA-6C6F68C91FB6, small LPT model

[    5.569215@0] eth0: device MAC address 02:e2:3f:06:b7:52

[    5.653104@2] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.

[    5.654446@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    5.867635@3] uart_trans: loading out-of-tree module taints kernel.

[    5.869999@3] register uart_trans chrdev success.

[    5.873418@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600

[    5.881114@3] tty port open success [/dev/ttyS3]!

[    5.885652@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200

[    5.894106@3] init sucess for tty struct (246:3)  [/dev/ttyS3]

[    5.900169@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600

[    5.907840@3] tty port open success [/dev/ttyS2]!

[    5.912525@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200

[    5.920922@3] init sucess for tty struct (246:2)  [/dev/ttyS2]

[    5.927012@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600

[    5.934707@3] tty port open success [/dev/ttyS1]!

[    5.939392@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200

[    5.947788@3] init sucess for tty struct (246:1)  [/dev/ttyS1]

[    5.953983@2] create workqueue success!

[    7.688582@2] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off

[    7.691687@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   19.136959@2] uart trans dev open.

[   19.137080@2] uart_buf virt addr = 0xffffffc00b180000

[   19.139776@2] uart_buf phys addr = 0x0b180000

[   19.144149@2] uart_buf pfn       = 0x0000b180

[   19.148783@2] uart trans stop send work timer.

[   19.153070@2] uart trans set chain exist bits:0x7.

[   19.157675@2] uart trans set work queue count 768.

[   85.114782@0] uart set baud to: 4098

[   85.114842@0] uart set baud to: 4098

[   85.116391@0] uart set baud to: 4098

[  101.415449@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 3000000

[  101.418580@2] uart set baud to: 4109

[  101.482699@3] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 3000000

[  101.485823@3] uart set baud to: 4109

[  101.549876@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 3000000

[  101.552992@3] uart set baud to: 4109

[  159.335578@0] uart trans start send work timer.

[68404.924114@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.

 

 

===========================================Miner log===========================================

2015-01-01 00:00:15 Miner compile time: Thu Jun  9 13:06:22 CST 2022 type: Antminer BHB42XXX sn :JYZZE5UBCJHBF079H

2015-01-01 00:00:16 This is fix-freq version

2015-01-01 00:00:16 Miner compile time: Thu Jun  9 13:06:22 CST 2022 type: Antminer BHB42XXX

2015-01-01 00:00:16 Miner sn: JYZZE5UBCJHBF079H

2015-01-01 00:00:16 commit version: ffd674e 2022-06-09 10:18:00, build by: jenkins 2022-06-09 13:16:42

2015-01-01 00:00:16 opt_multi_version     = 1

2015-01-01 00:00:16 opt_bitmain_ab        = 1

2015-01-01 00:00:16 mid_auto_gen          = 1

2015-01-01 00:00:16 opt_bitmain_work_mode = 0

2015-01-01 00:00:16 port 439 already exported

2015-01-01 00:00:16 port 454 already exported

2015-01-01 00:00:16 port 440 already exported

2015-01-01 00:00:16 port 455 already exported

2015-01-01 00:00:16 port 441 already exported

2015-01-01 00:00:16 port 456 already exported

2015-01-01 00:00:16 port 438 already exported

2015-01-01 00:00:16 port 453 already exported

2015-01-01 00:00:16 port 446 already exported

2015-01-01 00:00:16 port 445 already exported

2015-01-01 00:00:16 Note: front fan is power on!

2015-01-01 00:00:16 Note: rear fan is power on!

2015-01-01 00:00:16 start the http log.

2015-01-01 00:00:16 httpListenThread start ret=0

2015-01-01 00:00:16 start listen on 6060 ...

2015-01-01 00:00:16 bad chain id = 3

2015-01-01 00:00:19 bad chain id = 3

2015-01-01 00:00:21 ==========================capability start==========================

2015-01-01 00:00:21 board num = 3

2015-01-01 00:00:21 board id = 0, chain num = 1

2015-01-01 00:00:21 chain id = 0

2015-01-01 00:00:21 board id = 1, chain num = 1

2015-01-01 00:00:21 chain id = 1

2015-01-01 00:00:21 board id = 2, chain num = 1

2015-01-01 00:00:21 chain id = 2

2015-01-01 00:00:21 ==========================capability end============================

2015-01-01 00:00:21 chain num = 3

2015-01-01 00:00:21 skip loading levels for now

2015-01-01 00:00:22 load chain 0 eeprom data

2015-01-01 00:00:23 load chain 1 eeprom data

2015-01-01 00:00:23 load chain 2 eeprom data

2015-01-01 00:00:23 miner type: Antminer S19

2015-01-01 00:00:23 multi machine mode

2015-01-01 00:00:23 load machine BHB42831 conf

2015-01-01 00:00:23 machine : BHB42831 

2015-01-01 00:00:23 chain_num 4, chain_domain_num 44, chain_asic_num 88, domain_asic_num 2

2015-01-01 00:00:23 fan_eft : 0  fan_pwm : 100

2015-01-01 00:00:23 create thread get_nonce_and_register_thread

2015-01-01 00:00:23 fixed working voltage = 1580

2015-01-01 00:00:23 min freq in eeprom = 675

2015-01-01 00:00:23 fixed frequency is 675

2015-01-01 00:00:23 Chain [0] PCB Version: 0x0100

2015-01-01 00:00:23 Chain [0] BOM Version: 0x0010

2015-01-01 00:00:23 Chain [1] PCB Version: 0x0100

2015-01-01 00:00:23 Chain [1] BOM Version: 0x0010

2015-01-01 00:00:23 Chain [2] PCB Version: 0x0100

2015-01-01 00:00:23 Chain [2] BOM Version: 0x0010

2015-01-01 00:00:23 bad chain id = 3

2015-01-01 00:00:23 Fan check passed.

2015-01-01 00:00:23 uart_trans addr:0xf71c8000.

2015-01-01 00:00:23 max sensor num = 4

2015-01-01 00:00:23 STATUS_INITED: soc init done!

2015-01-01 00:00:23 temperature_monitor_thread start...

2024-01-14 22:35:04 start to init...

2024-01-14 22:35:04 i2c_sim_init start

2024-01-14 22:35:04 init gpio477

2024-01-14 22:35:04 init gpio476

2024-01-14 22:35:04 i2c_sim_init end

2024-01-14 22:35:06 power open power_version = 0x78

2024-01-14 22:35:08 power is not Calibrated

2024-01-14 22:35:10 power type version: 0x0078

2024-01-14 22:35:11 disable power watchdog: 0x0000

2024-01-14 22:35:12 Enter sleep to make sure power release finish.

2024-01-14 22:35:43 Slept 30 seconds, diff = 1.

2024-01-14 22:35:47 set_voltage_by_steps to 1700.

2024-01-14 22:35:56 start up min temp by 75a = 22

2024-01-14 22:35:59 Chain[0]: find 88 asic, times 0

2024-01-14 22:36:01 Chain[1]: find 88 asic, times 0

2024-01-14 22:36:03 Chain[2]: find 88 asic, times 0

2024-01-14 22:36:08 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1

2024-01-14 22:36:13 Bring up temperature is 23

2024-01-14 22:36:13 set UART baud to 3000000

2024-01-14 22:36:13 create thread check_miner_status_thread

2024-01-14 22:36:13 create thread check_system_work_thread

2024-01-14 22:36:13 set_voltage_by_steps to 1650.

2024-01-14 22:36:15 fixed step freq_start = 50, freq_end = 675, freq_step = 6.25

2024-01-14 22:36:15 chain = 0 set freq to 56.25

2024-01-14 22:36:15 chain = 1 set freq to 56.25

2024-01-14 22:36:15 chain = 2 set freq to 56.25

2024-01-14 22:36:15 chain = 0 set freq to 62.50

2024-01-14 22:36:15 chain = 1 set freq to 62.50

2024-01-14 22:36:15 chain = 2 set freq to 62.50

2024-01-14 22:36:16 chain = 0 set freq to 68.75

2024-01-14 22:36:16 chain = 1 set freq to 68.75

2024-01-14 22:36:16 chain = 2 set freq to 68.75

2024-01-14 22:36:16 chain = 0 set freq to 75.00

2024-01-14 22:36:16 chain = 1 set freq to 75.00

2024-01-14 22:36:16 chain = 2 set freq to 75.00

2024-01-14 22:36:16 chain = 0 set freq to 81.25

2024-01-14 22:36:16 chain = 1 set freq to 81.25

2024-01-14 22:36:16 chain = 2 set freq to 81.25

2024-01-14 22:36:17 chain = 0 set freq to 87.50

2024-01-14 22:36:17 chain = 1 set freq to 87.50

2024-01-14 22:36:17 chain = 2 set freq to 87.50

2024-01-14 22:36:17 chain = 0 set freq to 93.75

2024-01-14 22:36:17 chain = 1 set freq to 93.75

2024-01-14 22:36:17 chain = 2 set freq to 93.75

2024-01-14 22:36:17 chain = 0 set freq to 100.00

2024-01-14 22:36:17 chain = 1 set freq to 100.00

2024-01-14 22:36:17 chain = 2 set freq to 100.00

2024-01-14 22:36:18 chain = 0 set freq to 106.25

2024-01-14 22:36:18 chain = 1 set freq to 106.25

2024-01-14 22:36:18 chain = 2 set freq to 106.25

2024-01-14 22:36:18 chain = 0 set freq to 112.50

2024-01-14 22:36:18 chain = 1 set freq to 112.50

2024-01-14 22:36:18 chain = 2 set freq to 112.50

2024-01-14 22:36:18 chain = 0 set freq to 118.75

2024-01-14 22:36:18 chain = 1 set freq to 118.75

2024-01-14 22:36:18 chain = 2 set freq to 118.75

2024-01-14 22:36:18 chain = 0 set freq to 125.00

2024-01-14 22:36:18 chain = 1 set freq to 125.00

2024-01-14 22:36:18 chain = 2 set freq to 125.00

2024-01-14 22:36:19 chain = 0 set freq to 131.25

2024-01-14 22:36:19 chain = 1 set freq to 131.25

2024-01-14 22:36:19 chain = 2 set freq to 131.25

2024-01-14 22:36:19 chain = 0 set freq to 137.50

2024-01-14 22:36:19 chain = 1 set freq to 137.50

2024-01-14 22:36:19 chain = 2 set freq to 137.50

2024-01-14 22:36:19 chain = 0 set freq to 143.75

2024-01-14 22:36:19 chain = 1 set freq to 143.75

2024-01-14 22:36:19 chain = 2 set freq to 143.75

2024-01-14 22:36:20 chain = 0 set freq to 150.00

2024-01-14 22:36:20 chain = 1 set freq to 150.00

2024-01-14 22:36:20 chain = 2 set freq to 150.00

2024-01-14 22:36:20 chain = 0 set freq to 156.25

2024-01-14 22:36:20 chain = 1 set freq to 156.25

2024-01-14 22:36:20 chain = 2 set freq to 156.25

2024-01-14 22:36:20 chain = 0 set freq to 162.50

2024-01-14 22:36:20 chain = 1 set freq to 162.50

2024-01-14 22:36:20 chain = 2 set freq to 162.50

2024-01-14 22:36:21 chain = 0 set freq to 168.75

2024-01-14 22:36:21 chain = 1 set freq to 168.75

2024-01-14 22:36:21 chain = 2 set freq to 168.75

2024-01-14 22:36:21 chain = 0 set freq to 175.00

2024-01-14 22:36:21 chain = 1 set freq to 175.00

2024-01-14 22:36:21 chain = 2 set freq to 175.00

2024-01-14 22:36:21 chain = 0 set freq to 181.25

2024-01-14 22:36:21 chain = 1 set freq to 181.25

2024-01-14 22:36:21 chain = 2 set freq to 181.25

2024-01-14 22:36:21 chain = 0 set freq to 187.50

2024-01-14 22:36:21 chain = 1 set freq to 187.50

2024-01-14 22:36:21 chain = 2 set freq to 187.50

2024-01-14 22:36:22 chain = 0 set freq to 193.75

2024-01-14 22:36:22 chain = 1 set freq to 193.75

2024-01-14 22:36:22 chain = 2 set freq to 193.75

2024-01-14 22:36:22 chain = 0 set freq to 200.00

2024-01-14 22:36:22 chain = 1 set freq to 200.00

2024-01-14 22:36:22 chain = 2 set freq to 200.00

2024-01-14 22:36:22 chain = 0 set freq to 206.25

2024-01-14 22:36:22 chain = 1 set freq to 206.25

2024-01-14 22:36:22 chain = 2 set freq to 206.25

2024-01-14 22:36:23 chain = 0 set freq to 212.50

2024-01-14 22:36:23 chain = 1 set freq to 212.50

2024-01-14 22:36:23 chain = 2 set freq to 212.50

2024-01-14 22:36:23 chain = 0 set freq to 218.75

2024-01-14 22:36:23 chain = 1 set freq to 218.75

2024-01-14 22:36:23 chain = 2 set freq to 218.75

2024-01-14 22:36:23 chain = 0 set freq to 225.00

2024-01-14 22:36:23 chain = 1 set freq to 225.00

2024-01-14 22:36:23 chain = 2 set freq to 225.00

2024-01-14 22:36:24 chain = 0 set freq to 231.25

2024-01-14 22:36:24 chain = 1 set freq to 231.25

2024-01-14 22:36:24 chain = 2 set freq to 231.25

2024-01-14 22:36:24 chain = 0 set freq to 237.50

2024-01-14 22:36:24 chain = 1 set freq to 237.50

2024-01-14 22:36:24 chain = 2 set freq to 237.50

2024-01-14 22:36:24 chain = 0 set freq to 243.75

2024-01-14 22:36:24 chain = 1 set freq to 243.75

2024-01-14 22:36:24 chain = 2 set freq to 243.75

2024-01-14 22:36:24 chain = 0 set freq to 250.00

2024-01-14 22:36:24 chain = 1 set freq to 250.00

2024-01-14 22:36:24 chain = 2 set freq to 250.00

2024-01-14 22:36:25 chain = 0 set freq to 256.25

2024-01-14 22:36:25 chain = 1 set freq to 256.25

2024-01-14 22:36:25 chain = 2 set freq to 256.25

2024-01-14 22:36:25 chain = 0 set freq to 262.50

2024-01-14 22:36:25 chain = 1 set freq to 262.50

2024-01-14 22:36:25 chain = 2 set freq to 262.50

2024-01-14 22:36:25 chain = 0 set freq to 268.75

2024-01-14 22:36:25 chain = 1 set freq to 268.75

2024-01-14 22:36:25 chain = 2 set freq to 268.75

2024-01-14 22:36:26 chain = 0 set freq to 275.00

2024-01-14 22:36:26 chain = 1 set freq to 275.00

2024-01-14 22:36:26 chain = 2 set freq to 275.00

2024-01-14 22:36:26 chain = 0 set freq to 281.25

2024-01-14 22:36:26 chain = 1 set freq to 281.25

2024-01-14 22:36:26 chain = 2 set freq to 281.25

2024-01-14 22:36:26 chain = 0 set freq to 287.50

2024-01-14 22:36:26 chain = 1 set freq to 287.50

2024-01-14 22:36:26 chain = 2 set freq to 287.50

2024-01-14 22:36:27 chain = 0 set freq to 293.75

2024-01-14 22:36:27 chain = 1 set freq to 293.75

2024-01-14 22:36:27 chain = 2 set freq to 293.75

2024-01-14 22:36:27 chain = 0 set freq to 300.00

2024-01-14 22:36:27 chain = 1 set freq to 300.00

2024-01-14 22:36:27 chain = 2 set freq to 300.00

2024-01-14 22:36:27 chain = 0 set freq to 306.25

2024-01-14 22:36:27 chain = 1 set freq to 306.25

2024-01-14 22:36:27 chain = 2 set freq to 306.25

2024-01-14 22:36:28 chain = 0 set freq to 312.50

2024-01-14 22:36:28 chain = 1 set freq to 312.50

2024-01-14 22:36:28 chain = 2 set freq to 312.50

2024-01-14 22:36:28 chain = 0 set freq to 318.75

2024-01-14 22:36:28 chain = 1 set freq to 318.75

2024-01-14 22:36:28 chain = 2 set freq to 318.75

2024-01-14 22:36:28 chain = 0 set freq to 325.00

2024-01-14 22:36:28 chain = 1 set freq to 325.00

2024-01-14 22:36:28 chain = 2 set freq to 325.00

2024-01-14 22:36:28 chain = 0 set freq to 331.25

2024-01-14 22:36:28 chain = 1 set freq to 331.25

2024-01-14 22:36:28 chain = 2 set freq to 331.25

2024-01-14 22:36:29 chain = 0 set freq to 337.50

2024-01-14 22:36:29 chain = 1 set freq to 337.50

2024-01-14 22:36:29 chain = 2 set freq to 337.50

2024-01-14 22:36:29 chain = 0 set freq to 343.75

2024-01-14 22:36:29 chain = 1 set freq to 343.75

2024-01-14 22:36:29 chain = 2 set freq to 343.75

2024-01-14 22:36:29 chain = 0 set freq to 350.00

2024-01-14 22:36:29 chain = 1 set freq to 350.00

2024-01-14 22:36:29 chain = 2 set freq to 350.00

2024-01-14 22:36:30 chain = 0 set freq to 356.25

2024-01-14 22:36:30 chain = 1 set freq to 356.25

2024-01-14 22:36:30 chain = 2 set freq to 356.25

2024-01-14 22:36:30 chain = 0 set freq to 362.50

2024-01-14 22:36:30 chain = 1 set freq to 362.50

2024-01-14 22:36:30 chain = 2 set freq to 362.50

2024-01-14 22:36:30 chain = 0 set freq to 368.75

2024-01-14 22:36:30 chain = 1 set freq to 368.75

2024-01-14 22:36:30 chain = 2 set freq to 368.75

2024-01-14 22:36:31 chain = 0 set freq to 375.00

2024-01-14 22:36:31 chain = 1 set freq to 375.00

2024-01-14 22:36:31 chain = 2 set freq to 375.00

2024-01-14 22:36:31 chain = 0 set freq to 381.25

2024-01-14 22:36:31 chain = 1 set freq to 381.25

2024-01-14 22:36:31 chain = 2 set freq to 381.25

2024-01-14 22:36:31 chain = 0 set freq to 387.50

2024-01-14 22:36:31 chain = 1 set freq to 387.50

2024-01-14 22:36:31 chain = 2 set freq to 387.50

2024-01-14 22:36:31 chain = 0 set freq to 393.75

2024-01-14 22:36:31 chain = 1 set freq to 393.75

2024-01-14 22:36:31 chain = 2 set freq to 393.75

2024-01-14 22:36:32 chain = 0 set freq to 400.00

2024-01-14 22:36:32 chain = 1 set freq to 400.00

2024-01-14 22:36:32 chain = 2 set freq to 400.00

2024-01-14 22:36:32 chain = 0 set freq to 406.25

2024-01-14 22:36:32 chain = 1 set freq to 406.25

2024-01-14 22:36:32 chain = 2 set freq to 406.25

2024-01-14 22:36:32 chain = 0 set freq to 412.50

2024-01-14 22:36:32 chain = 1 set freq to 412.50

2024-01-14 22:36:32 chain = 2 set freq to 412.50

2024-01-14 22:36:33 chain = 0 set freq to 418.75

2024-01-14 22:36:33 chain = 1 set freq to 418.75

2024-01-14 22:36:33 chain = 2 set freq to 418.75

2024-01-14 22:36:33 chain = 0 set freq to 425.00

2024-01-14 22:36:33 chain = 1 set freq to 425.00

2024-01-14 22:36:33 chain = 2 set freq to 425.00

2024-01-14 22:36:33 chain = 0 set freq to 431.25

2024-01-14 22:36:33 chain = 1 set freq to 431.25

2024-01-14 22:36:33 chain = 2 set freq to 431.25

2024-01-14 22:36:34 chain = 0 set freq to 437.50

2024-01-14 22:36:34 chain = 1 set freq to 437.50

2024-01-14 22:36:34 chain = 2 set freq to 437.50

2024-01-14 22:36:34 chain = 0 set freq to 443.75

2024-01-14 22:36:34 chain = 1 set freq to 443.75

2024-01-14 22:36:34 chain = 2 set freq to 443.75

2024-01-14 22:36:34 chain = 0 set freq to 450.00

2024-01-14 22:36:34 chain = 1 set freq to 450.00

2024-01-14 22:36:34 chain = 2 set freq to 450.00

2024-01-14 22:36:34 chain = 0 set freq to 456.25

2024-01-14 22:36:34 chain = 1 set freq to 456.25

2024-01-14 22:36:34 chain = 2 set freq to 456.25

2024-01-14 22:36:35 chain = 0 set freq to 462.50

2024-01-14 22:36:35 chain = 1 set freq to 462.50

2024-01-14 22:36:35 chain = 2 set freq to 462.50

2024-01-14 22:36:35 chain = 0 set freq to 468.75

2024-01-14 22:36:35 chain = 1 set freq to 468.75

2024-01-14 22:36:35 chain = 2 set freq to 468.75

2024-01-14 22:36:35 chain = 0 set freq to 475.00

2024-01-14 22:36:35 chain = 1 set freq to 475.00

2024-01-14 22:36:35 chain = 2 set freq to 475.00

2024-01-14 22:36:36 chain = 0 set freq to 481.25

2024-01-14 22:36:36 chain = 1 set freq to 481.25

2024-01-14 22:36:36 chain = 2 set freq to 481.25

2024-01-14 22:36:36 chain = 0 set freq to 487.50

2024-01-14 22:36:36 chain = 1 set freq to 487.50

2024-01-14 22:36:36 chain = 2 set freq to 487.50

2024-01-14 22:36:36 chain = 0 set freq to 493.75

2024-01-14 22:36:36 chain = 1 set freq to 493.75

2024-01-14 22:36:36 chain = 2 set freq to 493.75

2024-01-14 22:36:37 chain = 0 set freq to 500.00

2024-01-14 22:36:37 chain = 1 set freq to 500.00

2024-01-14 22:36:37 chain = 2 set freq to 500.00

2024-01-14 22:36:37 chain = 0 set freq to 506.25

2024-01-14 22:36:37 chain = 1 set freq to 506.25

2024-01-14 22:36:37 chain = 2 set freq to 506.25

2024-01-14 22:36:37 chain = 0 set freq to 512.50

2024-01-14 22:36:37 chain = 1 set freq to 512.50

2024-01-14 22:36:37 chain = 2 set freq to 512.50

2024-01-14 22:36:37 chain = 0 set freq to 518.75

2024-01-14 22:36:37 chain = 1 set freq to 518.75

2024-01-14 22:36:37 chain = 2 set freq to 518.75

2024-01-14 22:36:38 chain = 0 set freq to 525.00

2024-01-14 22:36:38 chain = 1 set freq to 525.00

2024-01-14 22:36:38 chain = 2 set freq to 525.00

2024-01-14 22:36:38 chain = 0 set freq to 531.25

2024-01-14 22:36:38 chain = 1 set freq to 531.25

2024-01-14 22:36:38 chain = 2 set freq to 531.25

2024-01-14 22:36:38 chain = 0 set freq to 537.50

2024-01-14 22:36:38 chain = 1 set freq to 537.50

2024-01-14 22:36:38 chain = 2 set freq to 537.50

2024-01-14 22:36:39 chain = 0 set freq to 543.75

2024-01-14 22:36:39 chain = 1 set freq to 543.75

2024-01-14 22:36:39 chain = 2 set freq to 543.75

2024-01-14 22:36:39 chain = 0 set freq to 550.00

2024-01-14 22:36:39 chain = 1 set freq to 550.00

2024-01-14 22:36:39 chain = 2 set freq to 550.00

2024-01-14 22:36:39 chain = 0 set freq to 556.25

2024-01-14 22:36:39 chain = 1 set freq to 556.25

2024-01-14 22:36:39 chain = 2 set freq to 556.25

2024-01-14 22:36:40 chain = 0 set freq to 562.50

2024-01-14 22:36:40 chain = 1 set freq to 562.50

2024-01-14 22:36:40 chain = 2 set freq to 562.50

2024-01-14 22:36:40 chain = 0 set freq to 568.75

2024-01-14 22:36:40 chain = 1 set freq to 568.75

2024-01-14 22:36:40 chain = 2 set freq to 568.75

2024-01-14 22:36:40 chain = 0 set freq to 575.00

2024-01-14 22:36:40 chain = 1 set freq to 575.00

2024-01-14 22:36:40 chain = 2 set freq to 575.00

2024-01-14 22:36:40 chain = 0 set freq to 581.25

2024-01-14 22:36:40 chain = 1 set freq to 581.25

2024-01-14 22:36:40 chain = 2 set freq to 581.25

2024-01-14 22:36:41 chain = 0 set freq to 587.50

2024-01-14 22:36:41 chain = 1 set freq to 587.50

2024-01-14 22:36:41 chain = 2 set freq to 587.50

2024-01-14 22:36:41 chain = 0 set freq to 593.75

2024-01-14 22:36:41 chain = 1 set freq to 593.75

2024-01-14 22:36:41 chain = 2 set freq to 593.75

2024-01-14 22:36:41 chain = 0 set freq to 600.00

2024-01-14 22:36:41 chain = 1 set freq to 600.00

2024-01-14 22:36:41 chain = 2 set freq to 600.00

2024-01-14 22:36:42 chain = 0 set freq to 606.25

2024-01-14 22:36:42 chain = 1 set freq to 606.25

2024-01-14 22:36:42 chain = 2 set freq to 606.25

2024-01-14 22:36:42 chain = 0 set freq to 612.50

2024-01-14 22:36:42 chain = 1 set freq to 612.50

2024-01-14 22:36:42 chain = 2 set freq to 612.50

2024-01-14 22:36:42 chain = 0 set freq to 618.75

2024-01-14 22:36:42 chain = 1 set freq to 618.75

2024-01-14 22:36:42 chain = 2 set freq to 618.75

2024-01-14 22:36:43 chain = 0 set freq to 625.00

2024-01-14 22:36:43 chain = 1 set freq to 625.00

2024-01-14 22:36:43 chain = 2 set freq to 625.00

2024-01-14 22:36:43 chain = 0 set freq to 631.25

2024-01-14 22:36:43 chain = 1 set freq to 631.25

2024-01-14 22:36:43 chain = 2 set freq to 631.25

2024-01-14 22:36:43 chain = 0 set freq to 637.50

2024-01-14 22:36:43 chain = 1 set freq to 637.50

2024-01-14 22:36:43 chain = 2 set freq to 637.50

2024-01-14 22:36:43 chain = 0 set freq to 643.75

2024-01-14 22:36:43 chain = 1 set freq to 643.75

2024-01-14 22:36:43 chain = 2 set freq to 643.75

2024-01-14 22:36:44 chain = 0 set freq to 650.00

2024-01-14 22:36:44 chain = 1 set freq to 650.00

2024-01-14 22:36:44 chain = 2 set freq to 650.00

2024-01-14 22:36:44 chain = 0 set freq to 656.25

2024-01-14 22:36:44 chain = 1 set freq to 656.25

2024-01-14 22:36:44 chain = 2 set freq to 656.25

2024-01-14 22:36:44 chain = 0 set freq to 662.50

2024-01-14 22:36:44 chain = 1 set freq to 662.50

2024-01-14 22:36:44 chain = 2 set freq to 662.50

2024-01-14 22:36:45 chain = 0 set freq to 668.75

2024-01-14 22:36:45 chain = 1 set freq to 668.75

2024-01-14 22:36:45 chain = 2 set freq to 668.75

2024-01-14 22:36:45 chain = 0 set freq to 675.00

2024-01-14 22:36:45 chain = 1 set freq to 675.00

2024-01-14 22:36:45 chain = 2 set freq to 675.00

2024-01-14 22:36:45 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1

2024-01-14 22:36:45 start do_core_reset

2024-01-14 22:36:59 end do_core_reset

2024-01-14 22:37:09 set_voltage_by_steps to 1580.

2024-01-14 22:37:10 create thread pic_heart_beat_thread

2024-01-14 22:37:10 Init done!

2024-01-14 22:37:10 STATUS_OKAY

2024-01-14 22:37:10 start the cached job

2024-01-14 22:37:10 Version num 65536

2024-01-14 22:37:10 Mask num 0x1fffe000

2024-01-14 22:37:10 opt_multi_version = 65536, interval timeout = 2290648

2024-01-14 22:37:10 freq = 675, percent = 90, hcn = 3883, timeout = 2290648

2024-01-14 22:37:11 set_start_time_point total_tv_start_sys=160 total_tv_end_sys=161

2024-01-14 22:37:12 enable power watchdog: 0x0001

2024-01-14 23:06:14 30m avg rate is 91610.83 in 29 mins

2024-01-14 23:36:16 30m avg rate is 91464.37 in 30 mins

2024-01-15 00:06:19 30m avg rate is 91491.94 in 30 mins

2024-01-15 00:36:21 30m avg rate is 91289.36 in 30 mins

2024-01-15 01:06:24 30m avg rate is 91175.31 in 30 mins

2024-01-15 01:36:26 30m avg rate is 91020.89 in 30 mins

2024-01-15 02:06:29 30m avg rate is 91380.21 in 30 mins

2024-01-15 02:36:31 30m avg rate is 91761.02 in 30 mins

2024-01-15 03:06:33 30m avg rate is 91314.96 in 30 mins

2024-01-15 03:36:36 30m avg rate is 91487.06 in 30 mins

2024-01-15 04:06:38 30m avg rate is 91483.39 in 30 mins

2024-01-15 04:36:41 30m avg rate is 91363.74 in 30 mins

2024-01-15 05:06:43 30m avg rate is 91351.60 in 30 mins

2024-01-15 05:36:45 30m avg rate is 91036.27 in 30 mins

2024-01-15 06:06:48 30m avg rate is 91844.00 in 30 mins

2024-01-15 06:36:50 30m avg rate is 91901.36 in 30 mins

2024-01-15 07:06:53 30m avg rate is 91458.88 in 30 mins

2024-01-15 07:36:55 30m avg rate is 91463.87 in 30 mins

2024-01-15 08:06:57 30m avg rate is 91721.10 in 30 mins

2024-01-15 08:37:00 30m avg rate is 91832.41 in 30 mins

2024-01-15 09:07:02 30m avg rate is 91391.80 in 30 mins

2024-01-15 09:37:05 30m avg rate is 91628.61 in 30 mins

2024-01-15 10:07:07 30m avg rate is 91965.42 in 30 mins

2024-01-15 10:37:10 30m avg rate is 91199.09 in 30 mins

2024-01-15 11:07:12 30m avg rate is 91691.46 in 30 mins

2024-01-15 11:37:14 30m avg rate is 91199.70 in 30 mins

2024-01-15 12:07:17 30m avg rate is 91730.51 in 30 mins

2024-01-15 12:37:19 30m avg rate is 91612.75 in 30 mins

2024-01-15 13:07:22 30m avg rate is 91642.43 in 30 mins

2024-01-15 13:37:24 30m avg rate is 91670.71 in 30 mins

2024-01-15 14:07:26 30m avg rate is 91605.84 in 30 mins

2024-01-15 14:37:29 30m avg rate is 91703.66 in 30 mins

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:43 set_voltage_by_steps to 1592.

2024-01-15 14:54:03 set_voltage_by_steps to 1604.

2024-01-15 14:54:33 set_voltage_by_steps to 1616.

2024-01-15 14:56:00 set_voltage_by_steps to 1628.

2024-01-15 15:00:02 set_voltage_by_steps to 1640.

2024-01-15 15:07:31 avg rate is lower than ideal rate, 47586.52 in 30 mins

2024-01-15 15:07:31 30m avg rate is 47586.52 in 30 mins

2024-01-15 15:07:31 chain 0 hash rate 1367.00 low in 15 mins

2024-01-15 15:07:31 chain 1 hash rate 1326.00 low in 15 mins

2024-01-15 15:07:31 chain 2 hash rate 1378.00 low in 15 mins

2024-01-15 15:22:32 chain 0 hash rate 0.00 low in 15 mins

2024-01-15 15:22:32 chain 1 hash rate 0.00 low in 15 mins

2024-01-15 15:22:32 chain 2 hash rate 0.00 low in 15 mins

2024-01-15 15:37:34 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 15:37:34 30m avg rate is 0.00 in 30 mins

2024-01-15 16:02:11 set_voltage_by_steps to 1652.

2024-01-15 16:07:36 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 16:07:36 30m avg rate is 0.00 in 30 mins

2024-01-15 16:37:38 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 16:37:38 30m avg rate is 0.00 in 30 mins

2024-01-15 17:07:41 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 17:07:41 30m avg rate is 0.00 in 30 mins

2024-01-15 17:37:43 avg rate is lower than ideal rate, 0.00 in 30 mins

 

2024-01-15 17:37:43 30m avg rate is 0.00 in 30 mins

и второй

 

[    0.000000@0] Booting Linux on physical CPU 0x0

[    0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Thu Jun 9 13:22:51 CST 2022

[    0.000000@0] Boot CPU: AArch64 Processor [410fd034]

[    0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')

[    0.000000@0] bootconsole [aml_uart0] enabled

[    0.000000@0] efi: Getting EFI parameters from FDT:

[    0.000000@0] efi: UEFI not found.

[    0.000000@0] 07400000 - 07500000,     1024 KB, ramoops@0x07400000

[    0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB

[    0.000000@0] 05000000 - 05400000,     4096 KB, linux,secmon

[    0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000

[    0.000000@0] On node 0 totalpages: 65536

[    0.000000@0]   DMA zone: 1024 pages used for memmap

[    0.000000@0]   DMA zone: 0 pages reserved

[    0.000000@0]   DMA zone: 65536 pages, LIFO batch:15

[    0.000000@0] psci: probing for conduit method from DT.

[    0.000000@0] psci: PSCIv1.0 detected in firmware.

[    0.000000@0] psci: Using standard PSCI v0.2 function IDs

[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.

[    0.000000@0] psci: SMC Calling Convention v1.1

[    0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400

[    0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096

[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

[    0.000000@0] Detected VIPT I-cache on CPU0

[    0.000000@0] CPU features: enabling workaround for ARM erratum 845719

[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64512

[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 rootfstype=ramfs init=/sbin/init

[    0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)

[    0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)

[    0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.000000@0] Memory: 211704K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 29960K reserved, 20480K cma-reserved)

[    0.000000@0] Virtual kernel memory layout:

[    0.000000@0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)

[    0.000000@0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)

[    0.000000@0]       .text : 0xffffff8009080000 - 0xffffff8009910000   (  8768 KB)

[    0.000000@0]     .rodata : 0xffffff8009910000 - 0xffffff8009b80000   (  2496 KB)

[    0.000000@0]       .init : 0xffffff8009b80000 - 0xffffff8009f10000   (  3648 KB)

[    0.000000@0]       .data : 0xffffff8009f10000 - 0xffffff800a03aa00   (  1195 KB)

[    0.000000@0]        .bss : 0xffffff800a03aa00 - 0xffffff800a139034   (  1018 KB)

[    0.000000@0]     fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)

[    0.000000@0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)

[    0.000000@0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)

[    0.000000@0]               0xffffffbf00000000 - 0xffffffbf00400000   (     4 MB actual)

[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc010000000   (   256 MB)

[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000@0] Preemptible hierarchical RCU implementation.

[    0.000000@0] Build-time adjustment of leaf fanout to 64.

[    0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.

[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000@0] NR_IRQS:64 nr_irqs:64 0

[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized

[    0.000000@0] axg_aoclkc_init: register ao clk ok!

[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk

[    0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk

[    0.000000@0] axg_amlogic_init_media: register meson media clk

[    0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks

[    0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk

[    0.000000@0] axg_clkc_init initialization complete

[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).

[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

[    0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

[    0.008251@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194

[    0.016912@0] Console: colour dummy device 80x25

[    0.021106@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)

[    0.031586@0] pid_max: default: 32768 minimum: 301

[    0.036436@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0

[    0.045773@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000

[    0.056005@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]

[    0.062304@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]

[    0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]

[    0.074903@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]

[    0.081203@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]

[    0.087503@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]

[    0.093803@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]

[    0.100103@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]

[    0.106464@0] Security Framework initialized

[    0.110696@0] SELinux:  Initializing.

[    0.114387@0] SELinux:  Starting in permissive mode

[    0.114424@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

[    0.121106@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)

[    0.128837@0] ftrace: allocating 30061 entries in 118 pages

[    0.186516@0] sched-energy: CPU device node has no sched-energy-costs

[    0.187330@0] CPU0: update cpu_capacity 1024

[    0.191657@0] ASID allocator initialised with 32768 entries

[    0.229803@0] secmon: can't fine clear_range

[    0.230006@0] EFI services will not be available.

[    0.233267@0] Meson chip version = RevC (25:C - 23:0)

[    0.266948@1] Detected VIPT I-cache on CPU1

[    0.267007@1] CPU1: update cpu_capacity 1024

[    0.267009@1] CPU1: Booted secondary processor [410fd034]

[    0.295013@2] Detected VIPT I-cache on CPU2

[    0.295065@2] CPU2: update cpu_capacity 1024

[    0.295067@2] CPU2: Booted secondary processor [410fd034]

[    0.323075@3] Detected VIPT I-cache on CPU3

[    0.323124@3] CPU3: update cpu_capacity 1024

[    0.323126@3] CPU3: Booted secondary processor [410fd034]

[    0.323218@0] Brought up 4 CPUs

[    0.362433@0] SMP: Total of 4 processors activated.

[    0.367342@0] CPU features: detected feature: 32-bit EL0 Support

[    0.373378@0] CPU features: detected feature: Kernel page table isolation (KPTI)

[    0.383932@0] CPU: All CPU(s) started at EL2

[    0.385118@0] alternatives: patching kernel code

[    0.390418@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755

[    0.397644@0] devtmpfs: initialized

[    0.412632@0] DMI not present or invalid.

[    0.413043@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.421002@0] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.427578@0] pinctrl core: initialized pinctrl subsystem

[    0.433967@0] NET: Registered protocol family 16

[    0.457528@0] cpuidle: using governor menu

[    0.458020@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)

[    0.463640@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.

[    0.471051@0] DMA: preallocated 256 KiB pool for atomic allocations

[    0.477194@0] clkmsr: clkmsr: driver init

[    0.481244@0] aml_watch_point_probe, in, wp:2

[    0.485818@0] pstore: using zlib compression

[    0.490080@0] console [pstore-1] enabled

[    0.493518@0] pstore: Registered ramoops as persistent store backend

[    0.499925@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0

[    0.514276@0] aml_iomap: amlogic iomap probe done

[    0.521113@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c

[    0.523054@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0

[    0.616719@0] usbcore: registered new interface driver usbfs

[    0.616882@0] usbcore: registered new interface driver hub

[    0.622502@0] usbcore: registered new device driver usb

[    0.627790@0] pps_core: LinuxPPS API ver. 1 registered

[    0.632711@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>

[    0.642109@0] PTP clock support registered

[    0.646451@0] dmi: Firmware registration failed.

[    0.651437@0] secmon: reserve_mem_size:0x300000

[    0.655492@0] secmon secmon: assigned reserved memory node linux,secmon

[    0.662372@0] secmon: get page:ffffffbf00140000, 5000

[    0.667097@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000

[    0.675492@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000

[    0.683362@0] NetLabel: Initializing

[    0.685530@0] NetLabel:  domain hash size = 128

[    0.690130@0] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.695352@0] NetLabel:  unlabeled traffic allowed by default

[    0.701949@0] clocksource: Switched to clocksource arch_sys_counter

[    0.828742@0] VFS: Disk quotas dquot_6.6.0

[    0.828890@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.854883@0] NET: Registered protocol family 2

[    0.855912@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)

[    0.861139@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)

[    0.867797@0] TCP: Hash tables configured (established 2048 bind 2048)

[    0.874376@0] UDP hash table entries: 256 (order: 1, 8192 bytes)

[    0.880342@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    0.887073@0] NET: Registered protocol family 1

[    0.892052@0] RPC: Registered named UNIX socket transport module.

[    0.897469@0] RPC: Registered udp transport module.

[    0.902364@0] RPC: Registered tcp transport module.

[    0.907252@0] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.916381@0] Unpacking initramfs...

[    1.415340@1] Initramfs unpacking failed: junk in compressed archive

[    1.422232@1] Freeing initrd memory: 6556K

[    1.423129@1] hw perfevents: clusterb_enabled = 0

[    1.425421@1] hw perfevents: cpumasks 0xf, 0x0

[    1.429968@1] hw perfevents: cluster A irq = 7

[    1.434525@1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available

[    1.444603@1] audit: initializing netlink subsys (disabled)

[    1.448060@1] audit: type=2000 audit(1.260:1): initialized

[    1.455397@1] workingset: timestamp_bits=62 max_order=16 bucket_order=0

[    1.479116@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    1.486066@1] NFS: Registering the id_resolver key type

[    1.486153@1] Key type id_resolver registered

[    1.490067@1] Key type id_legacy registered

[    1.494669@1] fuse init (API version 7.26)

[    1.500047@1] SELinux:  Registering netfilter hooks

[    1.506252@1] NET: Registered protocol family 38

[    1.506311@1] Key type asymmetric registered

[    1.509521@1] Asymmetric key parser 'x509' registered

[    1.515056@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)

[    1.522253@1] io scheduler noop registered (default)

[    1.527225@1] io scheduler deadline registered

[    1.532110@1] io scheduler cfq registered

[    1.552748@1] Unable to detect cache hierarchy for CPU 0

[    1.552992@1] random: fast init done

[    1.556274@1] random: crng init done

[    1.575619@1] loop: module loaded

[    1.581130@1] zram: Added device: zram0

[    1.581570@1] mtdoops: mtd device (mtddev=name/number) must be supplied

[    1.586494@1] libphy: Fixed MDIO Bus: probed

[    1.591125@1] tun: Universal TUN/TAP device driver, 1.6

[    1.595557@1] tun: © 1999-2004 Max Krasnyansky <[email protected]>

[    1.603749@1]  ee eth reset:Addr = ffffff80081fd008

[    1.611270@1] meson6-dwmac ff3f0000.ethernet: no reset control found

[    1.613197@1] stmmac - user ID: 0x11, Synopsys ID: 0x37

[    1.618472@1]  Ring mode enabled

[    1.621678@1]  DMA HW capability register supported

[    1.626430@1]  Normal descriptors

[    1.629726@1]  RX Checksum Offload Engine supported

[    1.634643@1] COE Type 2

[    1.637251@1]  TX Checksum insertion supported

[    1.641737@1]  Wake-Up On Lan supported

[    1.645673@1]  Enable RX Mitigation via HW Watchdog Timer

[    1.659141@1] libphy: stmmac: probed

[    1.659192@1] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active

[    1.665615@1] PPP generic driver version 2.4.2

[    1.668610@1] PPP BSD Compression module registered

[    1.673133@1] PPP Deflate Compression module registered

[    1.678375@1] PPP MPPE Compression module registered

[    1.683349@1] NET: Registered protocol family 24

[    1.688825@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.694747@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.701789@1] usbcore: registered new interface driver cdc_acm

[    1.706991@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    1.715410@1] usbcore: registered new interface driver usbserial

[    1.722138@2] mousedev: PS/2 mouse device common for all mice

[    1.727550@2] usbcore: registered new interface driver xpad

[    1.732964@1] i2c /dev entries driver

[    1.737659@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized

[    1.741981@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi

[    1.752882@1] ff803000.serial: clock gate not found

[    1.754496@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000

[    1.761666@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart

[    1.776599@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200

[    1.779303@1] console [ttyS0] enabled

[    1.786530@1] bootconsole [aml_uart0] disabled

[    1.796175@2] ff804000.serial: clock gate not found

[    1.800301@2] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000

[    1.807431@2] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart

[    1.817765@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000

[    1.823916@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart

[    1.834148@1] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000

[    1.840351@1] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart

[    1.851329@2] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000

[    1.860663@2] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port

[    1.867133@2] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080

[    1.882221@2] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40

[    1.885917@2] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40

[    1.898270@2] aml_dma ff63e000.aml_dma: Aml dma

[    1.901380@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma

[    1.906548@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma

[    1.912814@2] efusekeynum: 4

[    1.915190@2] efusekeyname:             mac offset:     0 size:     6

[    1.921588@2] efusekeyname:          mac_bt offset:     6 size:     6

[    1.927998@2] efusekeyname:        mac_wifi offset:    12 size:     6

[    1.934396@2] efusekeyname:            usid offset:    18 size:    16

[    1.941228@3] efuse efuse: probe OK!

[    1.946777@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller

[    1.953929@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode 

[    1.959000@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80

[    1.964213@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c

[    2.010093@0] meson-mmc: meson_mmc_probe() : success!

[    2.010351@0] amlogic mtd driver init

[    2.014393@0] prase_get_dtb_nand_parameter:128,parse dts start

[    2.019161@0] bl mode descrete

[    2.022041@0] fip_copies 4

[    2.024705@0] fip_size 0x200000

[    2.027846@0] nand_clk_ctrl 0xffe07000

[    2.031569@0] prase_get_dtb_nand_parameter:234,parse dts end

[    2.037237@0] nand_clk_ctrl 0xffe07000

[    2.040959@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000

[    2.049692@0] plat->aml_nand_device ffffff800a005c10

[    2.053871@0] m3_nand_probe() aml_nand_device ffffff800a005c10

[    2.059927@0] NAND device id: 2c da 90 95 6 0

[    2.063993@0] NAND device: Manufacturer ID: 

[    2.068059@0]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)

[    2.075157@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14

[    2.080537@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16

[    2.086084@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1

[    2.092330@0] mtd->oobavail: 0x8

[    2.095711@0] aml_nand_init 2119: plat-name:bootloader

[    2.100648@0] Creating 1 MTD partitions on "bootloader":

[    2.105951@0] 0x000000000000-0x000000200000 : "bootloader"

[    2.114849@3] bootloader initialized ok

[    2.115197@3] plat->aml_nand_device ffffff800a005c10

[    2.120187@3] m3_nand_probe() aml_nand_device ffffff800a005c10

[    2.126306@3] NAND device id: 2c da 90 95 6 0

[    2.130325@3] NAND device: Manufacturer ID: 

[    2.134362@3]  0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)

[    2.141404@3] oob_fill_cnt =32 oob_size =64, bch_bytes =14

[    2.146837@3] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16

[    2.152389@3] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1

[    2.158631@3] mtd->oobavail: 0x8

[    2.162088@3] aml_nand_init 2119: plat-name:nandnormal

[    2.166993@3] bbt_start=20

[    2.169609@3] env_start=24

[    2.172328@3] key_start=32

[    2.175002@3] dtb_start=40

[    2.177669@3] ddr_start=44

[    2.180376@3] nbbt: info size=0x800 max_scan_blk=24, start_blk=20

[    2.186872@3] get_free_node 43: bitmap=0

[    2.190344@3] get_free_node 55: bitmap=1

[    2.194435@3] get_free_node 43: bitmap=1

[    2.198143@3] get_free_node 55: bitmap=3

[    2.202234@3] get_free_node 43: bitmap=3

[    2.205924@3] get_free_node 55: bitmap=7

[    2.209826@3] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1

[    2.216513@3] nbbt free list:

[    2.219461@3] blockN=21, ec=-1, dirty_flag=0

[    2.223707@3] blockN=22, ec=-1, dirty_flag=0

[    2.227954@3] blockN=23, ec=-1, dirty_flag=0

[    2.232202@3] aml_nand_scan_rsv_info 1141: page_num=1

[    2.237610@3] nbbt valid addr: 280000

[    2.240869@3] aml_nand_bbt_check 1306 bbt is valid, reading.

[    2.246503@3] aml_nand_read_rsv_info:423,read nbbt info at 280000

[    2.252762@3] nenv: info size=0x10000 max_scan_blk=32, start_blk=24

[    2.259190@3] get_free_node 43: bitmap=7

[    2.262709@3] get_free_node 55: bitmap=f

[    2.266800@3] get_free_node 43: bitmap=f

[    2.270509@3] get_free_node 55: bitmap=1f

[    2.274686@3] get_free_node 43: bitmap=1f

[    2.278482@3] get_free_node 55: bitmap=3f

[    2.282659@3] get_free_node 43: bitmap=3f

[    2.286455@3] get_free_node 55: bitmap=7f

[    2.290633@3] get_free_node 43: bitmap=7f

[    2.294428@3] get_free_node 55: bitmap=ff

[    2.298606@3] get_free_node 43: bitmap=ff

[    2.302402@3] get_free_node 55: bitmap=1ff

[    2.306666@3] get_free_node 43: bitmap=1ff

[    2.310548@3] get_free_node 55: bitmap=3ff

[    2.314622@3] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1

[    2.321292@3] nenv free list:

[    2.324240@3] blockN=25, ec=-1, dirty_flag=0

[    2.328487@3] blockN=26, ec=-1, dirty_flag=0

[    2.332733@3] blockN=27, ec=-1, dirty_flag=0

[    2.336980@3] blockN=28, ec=-1, dirty_flag=0

[    2.341227@3] blockN=29, ec=-1, dirty_flag=0

[    2.345473@3] blockN=30, ec=-1, dirty_flag=0

[    2.349720@3] blockN=31, ec=-1, dirty_flag=0

[    2.353967@3] aml_nand_scan_rsv_info 1141: page_num=32

[    2.371219@3] nenv valid addr: 310000

[    2.371253@3] nkey: info size=0x8000 max_scan_blk=40, start_blk=32

[    2.375632@3] get_free_node 43: bitmap=3ff

[    2.379492@3] get_free_node 55: bitmap=7ff

[    2.383757@3] get_free_node 43: bitmap=7ff

[    2.387638@3] get_free_node 55: bitmap=fff

[    2.391903@3] get_free_node 43: bitmap=fff

[    2.395785@3] get_free_node 55: bitmap=1fff

[    2.400136@3] get_free_node 43: bitmap=1fff

[    2.404106@3] get_free_node 55: bitmap=3fff

[    2.408456@3] get_free_node 43: bitmap=3fff

[    2.412425@3] get_free_node 55: bitmap=7fff

[    2.416776@3] get_free_node 43: bitmap=7fff

[    2.420745@3] get_free_node 55: bitmap=ffff

[    2.425096@3] get_free_node 43: bitmap=ffff

[    2.429065@3] get_free_node 55: bitmap=1ffff

[    2.433504@3] get_free_node 43: bitmap=1ffff

[    2.437559@3] get_free_node 55: bitmap=3ffff

[    2.441803@3] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0

[    2.448476@3] nkey free list:

[    2.451423@3] blockN=32, ec=-1, dirty_flag=0

[    2.455670@3] blockN=33, ec=-1, dirty_flag=0

[    2.459916@3] blockN=34, ec=-1, dirty_flag=0

[    2.464163@3] blockN=35, ec=-1, dirty_flag=0

[    2.468410@3] blockN=36, ec=-1, dirty_flag=0

[    2.472656@3] blockN=37, ec=-1, dirty_flag=0

[    2.476903@3] blockN=38, ec=-1, dirty_flag=0

[    2.481150@3] blockN=39, ec=-1, dirty_flag=0

[    2.485397@3] aml_nand_scan_rsv_info 1141: page_num=16

[    2.490510@3] nkey valid addr: fffffffffffe0000

[    2.495017@3] aml_nand_key_check 1251 NO key exist

[    2.499785@3] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40

[    2.506407@3] get_free_node 43: bitmap=3ffff

[    2.510272@3] get_free_node 55: bitmap=7ffff

[    2.514710@3] get_free_node 43: bitmap=7ffff

[    2.518765@3] get_free_node 55: bitmap=fffff

[    2.523203@3] get_free_node 43: bitmap=fffff

[    2.527258@3] get_free_node 55: bitmap=1fffff

[    2.531592@3] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1

[    2.538262@3] ndtb free list:

[    2.541193@3] blockN=41, ec=-1, dirty_flag=0

[    2.545457@3] blockN=42, ec=-1, dirty_flag=0

[    2.549703@3] blockN=43, ec=-1, dirty_flag=0

[    2.553951@3] aml_nand_scan_rsv_info 1141: page_num=64

[    2.571198@3] ndtb valid addr: 500000

[    2.571232@3] nddr: info size=0x20000 max_scan_blk=46, start_blk=44

[    2.575681@3] get_free_node 43: bitmap=1fffff

[    2.579822@3] get_free_node 55: bitmap=3fffff

[    2.584345@3] get_free_node 43: bitmap=3fffff

[    2.588488@3] get_free_node 55: bitmap=7fffff

[    2.592822@3] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0

[    2.599492@3] nddr free list:

[    2.602440@3] blockN=44, ec=-1, dirty_flag=0

[    2.606686@3] blockN=45, ec=-1, dirty_flag=0

[    2.610933@3] aml_nand_scan_rsv_info 1141: page_num=64

[    2.616047@3] nddr valid addr: fffffffffffe0000

[    2.620553@3] aml_nand_ddr_check 1281 NO ddr exist

[    2.625323@3] tpl: off 8388608, size 8388608

[    2.756947@3] Creating 6 MTD partitions on "nandnormal":

[    2.756993@3] 0x000000800000-0x000001000000 : "tpl"

[    2.768606@2] 0x000001000000-0x000001200000 : "misc"

[    2.771745@0] 0x000001200000-0x000002200000 : "recovery"

[    2.783764@1] 0x000002200000-0x000004200000 : "boot"

[    2.802944@0] 0x000004200000-0x000004700000 : "config"

[    2.807554@0] 0x000004700000-0x000010000000 : "nvdata"

[    2.908878@2] nandnormal initialized ok

[    2.908987@2] aml_ubootenv_init: register env chardev

[    2.912508@2] aml_ubootenv_init: register env chardev OK

[    2.917561@2] amlnf_dtb_init: register dtb cdev

[    2.922332@1] amlnf_dtb_init: register dtd cdev OK

[    2.926755@1] mtd_nand_probe 267 , err = 0

[    2.931861@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0

[    2.937284@2] input: aml_vkeypad as /devices/platform/rtc/input/input0

[    2.944281@0] unifykey: storage in base: 0xffffffc005000000

[    2.948944@0] unifykey: storage out base: 0xffffffc005040000

[    2.954537@0] unifykey: storage block base: 0xffffffc005080000

[    2.960340@0] unifykey: probe done!

[    2.964515@0] unifykey: no efuse-version set, use default value: -1

[    2.970045@0] unifykey: key unify config unifykey-num is 6

[    2.975564@0] unifykey: key unify fact unifykey-num is 6

[    2.980783@0] unifykey: unifykey_devno: f200000

[    2.985739@1] unifykey: device unifykeys created ok

[    2.990277@1] unifykey: aml_unifykeys_init done!

[    2.995156@1] sysled: module init

[    2.998781@1] meson_wdt ffd0f0d0.watchdog: start watchdog

[    3.003447@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog

[    3.010796@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done

[    3.019515@2] dmc_monitor_probe

[    3.025266@2] defendkey defendkey: Reserved memory is not enough!

[    3.026151@2] defendkey: probe of defendkey failed with error -22

[    3.032540@2] GACT probability NOT on

[    3.035840@2] Mirror/redirect action on

[    3.039636@2] u32 classifier

[    3.042481@2]     Actions configured

[    3.046046@2] Netfilter messages via NETLINK v0.30.

[    3.051310@2] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)

[    3.057534@2] ctnetlink v0.93: registering with nfnetlink.

[    3.063339@2] xt_time: kernel timezone is -0000

[    3.067109@2] ipip: IPv4 and MPLS over IPv4 tunneling driver

[    3.073730@2] ip_tables: © 2000-2006 Netfilter Core Team

[    3.078426@2] arp_tables: arp_tables: © 2002 David S. Miller

[    3.083915@2] Initializing XFRM netlink socket

[    3.089437@2] NET: Registered protocol family 10

[    3.095399@2] mip6: Mobile IPv6

[    3.095989@2] ip6_tables: © 2000-2006 Netfilter Core Team

[    3.101995@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

[    3.109924@2] NET: Registered protocol family 17

[    3.112200@2] NET: Registered protocol family 15

[    3.116830@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.

[    3.130010@2] l2tp_core: L2TP core driver, V2.0

[    3.134375@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0

[    3.139290@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)

[    3.145047@2] l2tp_netlink: L2TP netlink interface

[    3.149858@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)

[    3.155914@2] l2tp_debugfs: L2TP debugfs support

[    3.160458@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)

[    3.167105@2] NET: Registered protocol family 35

[    3.172018@2] Key type dns_resolver registered

[    3.176577@2] Registered swp emulation handler

[    3.180568@2] Registered cp15_barrier emulation handler

[    3.185741@2] Registered setend emulation handler

[    3.190453@2] disable EAS feature

[    3.195165@0] registered taskstats version 1

[    3.211540@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host

[    3.718014@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller

[    3.718105@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1

[    3.726414@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010

[    3.734812@0] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000

[    3.742396@3] hub 1-0:1.0: USB hub found

[    3.744733@3] hub 1-0:1.0: 1 port detected

[    3.749404@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller

[    3.754421@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2

[    3.762299@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[    3.771776@1] hub 2-0:1.0: USB hub found

[    3.774416@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)

[    3.781699@1] usb usb2: Unsupported the hub

[    3.786559@1] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)

[    3.794550@1] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00d1ab000)

[    3.794626@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0

[    3.802501@1] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000

[    3.802514@1] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00bb1a400

[    3.903108@1] dwc_otg: Core Release: 3.10a

[    3.903163@1] dwc_otg: Setting default values for core params

[    3.907358@1] dwc_otg: curmode: 0, host_only: 0

[    3.911861@1] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT

[    3.924376@1] dwc_otg: Using Buffer DMA mode

[    3.924413@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1

[    3.928320@1] dwc_otg: Working on port type = SLAVE

[    3.933178@1] dwc_otg: Dedicated Tx FIFOs mode

[    3.940011@1] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22

[    3.946881@1] cpucore_cooling_register, max_cpu_core_num:4

[    3.959282@0] gxbb_pm: enter meson_pm_probe!

[    3.959337@0] no vddio3v3_en pin

[    3.960986@0] pm-meson aml_pm: Can't get switch_clk81

[    3.966090@0] gxbb_pm: meson_pm_probe done

[    3.971011@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200

[    3.977374@0] Freeing unused kernel memory: 3648K

[    3.992055@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200

[    4.254728@0] ubi0: attaching mtd5

[    4.273274@0] ubi0: scanning is finished

[    4.277897@2] ubi0: attached mtd5 (name "config", size 5 MiB)

[    4.278080@2] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

[    4.285063@2] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

[    4.292002@2] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

[    4.299099@2] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0

[    4.305173@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

[    4.312534@2] ubi0: max/mean erase counter: 16/8, WL threshold: 4096, image sequence number: 1503654059

[    4.321900@2] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4

[    4.331106@0] ubi0: background thread "ubi_bgt0d" started, PID 1077

[    4.344093@3] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1081

[    4.360690@1] UBIFS (ubi0:0): recovery needed

[    4.401884@2] UBIFS (ubi0:0): recovery completed

[    4.402215@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"

[    4.408887@2] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[    4.418929@2] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)

[    4.429151@2] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)

[    4.435741@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 25B12371-75AC-4A9F-A9C6-EC3451B1A1CA, small LPT model

[    4.460317@1] ubi2: attaching mtd6

[    5.132268@1] ubi2: scanning is finished

[    5.139172@0] ubi2: attached mtd6 (name "nvdata", size 185 MiB)

[    5.139470@0] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

[    5.146611@0] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

[    5.153447@0] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096

[    5.160540@0] ubi2: good PEBs: 1480, bad PEBs: 0, corrupted PEBs: 0

[    5.166788@0] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128

[    5.174148@0] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3883197181

[    5.183428@0] ubi2: available PEBs: 0, total reserved PEBs: 1480, PEBs reserved for bad PEB handling: 4

[    5.192802@2] ubi2: background thread "ubi_bgt2d" started, PID 1088

[    5.206062@1] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092

[    5.222680@0] UBIFS (ubi2:0): recovery needed

[    5.266576@0] UBIFS (ubi2:0): recovery completed

[    5.266869@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data"

[    5.273576@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[    5.283620@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)

[    5.294451@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)

[    5.301211@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 0470C4D6-D38C-4217-9EE5-61361EB52D1A, small LPT model

[    5.510678@0] eth0: device MAC address 02:6a:bb:00:f9:76

[    5.594607@1] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.

[    5.595913@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    5.810920@0] uart_trans: loading out-of-tree module taints kernel.

[    5.813307@0] register uart_trans chrdev success.

[    5.816698@0] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600

[    5.824341@0] tty port open success [/dev/ttyS3]!

[    5.828971@0] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200

[    5.837400@0] init sucess for tty struct (246:3)  [/dev/ttyS3]

[    5.843600@0] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600

[    5.851174@0] tty port open success [/dev/ttyS2]!

[    5.855836@0] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200

[    5.864235@0] init sucess for tty struct (246:2)  [/dev/ttyS2]

[    5.870337@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600

[    5.878029@0] tty port open success [/dev/ttyS1]!

[    5.882694@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200

[    5.891097@0] init sucess for tty struct (246:1)  [/dev/ttyS1]

[    5.897333@1] create workqueue success!

[    7.638225@1] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off

[    7.641332@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   19.079499@1] uart trans dev open.

[   19.079617@1] uart_buf virt addr = 0xffffffc00b140000

[   19.082380@1] uart_buf phys addr = 0x0b140000

[   19.086676@1] uart_buf pfn       = 0x0000b140

[   19.091293@1] uart trans stop send work timer.

[   19.095608@1] uart trans set chain exist bits:0x7.

[   19.100208@1] uart trans set work queue count 768.

[   74.070715@0] uart set baud to: 4098

[   74.070775@0] uart set baud to: 4098

[   74.072236@0] uart set baud to: 4098

[   90.373714@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 3000000

[   90.376836@1] uart set baud to: 4109

[   90.440798@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 3000000

[   90.443908@1] uart set baud to: 4109

[   90.507957@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 3000000

[   90.511090@1] uart set baud to: 4109

[  148.340573@3] uart trans start send work timer.

[31258.737903@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.

 

 

===========================================Miner log===========================================

2015-01-01 00:00:15 Miner compile time: Thu Jun  9 13:06:22 CST 2022 type: Antminer BHB42XXX sn :JYZZE5UBCJHBF02LH

2015-01-01 00:00:16 This is fix-freq version

2015-01-01 00:00:16 Miner compile time: Thu Jun  9 13:06:22 CST 2022 type: Antminer BHB42XXX

2015-01-01 00:00:16 Miner sn: JYZZE5UBCJHBF02LH

2015-01-01 00:00:16 commit version: ffd674e 2022-06-09 10:18:00, build by: jenkins 2022-06-09 13:16:42

2015-01-01 00:00:16 opt_multi_version     = 1

2015-01-01 00:00:16 opt_bitmain_ab        = 1

2015-01-01 00:00:16 mid_auto_gen          = 1

2015-01-01 00:00:16 opt_bitmain_work_mode = 0

2015-01-01 00:00:16 port 439 already exported

2015-01-01 00:00:16 port 454 already exported

2015-01-01 00:00:16 port 440 already exported

2015-01-01 00:00:16 port 455 already exported

2015-01-01 00:00:16 port 441 already exported

2015-01-01 00:00:16 port 456 already exported

2015-01-01 00:00:16 port 438 already exported

2015-01-01 00:00:16 port 453 already exported

2015-01-01 00:00:16 port 446 already exported

2015-01-01 00:00:16 port 445 already exported

2015-01-01 00:00:16 Note: front fan is power on!

2015-01-01 00:00:16 Note: rear fan is power on!

2015-01-01 00:00:16 start the http log.

2015-01-01 00:00:16 start listen on 6060 ...

2015-01-01 00:00:16 httpListenThread start ret=0

2015-01-01 00:00:16 bad chain id = 3

2015-01-01 00:00:19 bad chain id = 3

2015-01-01 00:00:21 ==========================capability start==========================

2015-01-01 00:00:21 board num = 3

2015-01-01 00:00:21 board id = 0, chain num = 1

2015-01-01 00:00:21 chain id = 0

2015-01-01 00:00:21 board id = 1, chain num = 1

2015-01-01 00:00:21 chain id = 1

2015-01-01 00:00:21 board id = 2, chain num = 1

2015-01-01 00:00:21 chain id = 2

2015-01-01 00:00:21 ==========================capability end============================

2015-01-01 00:00:21 chain num = 3

2015-01-01 00:00:21 skip loading levels for now

2015-01-01 00:00:22 load chain 0 eeprom data

2015-01-01 00:00:23 load chain 1 eeprom data

2015-01-01 00:00:23 load chain 2 eeprom data

2015-01-01 00:00:23 miner type: Antminer S19

2015-01-01 00:00:23 multi machine mode

2015-01-01 00:00:23 load machine BHB42831 conf

2015-01-01 00:00:23 machine : BHB42831 

2015-01-01 00:00:23 chain_num 4, chain_domain_num 44, chain_asic_num 88, domain_asic_num 2

2015-01-01 00:00:23 fan_eft : 0  fan_pwm : 100

2015-01-01 00:00:23 create thread get_nonce_and_register_thread

2015-01-01 00:00:23 fixed working voltage = 1580

2015-01-01 00:00:23 min freq in eeprom = 675

2015-01-01 00:00:23 fixed frequency is 675

2015-01-01 00:00:23 Chain [0] PCB Version: 0x0100

2015-01-01 00:00:23 Chain [0] BOM Version: 0x0010

2015-01-01 00:00:23 Chain [1] PCB Version: 0x0100

2015-01-01 00:00:23 Chain [1] BOM Version: 0x0010

2015-01-01 00:00:23 Chain [2] PCB Version: 0x0100

2015-01-01 00:00:23 Chain [2] BOM Version: 0x0010

2015-01-01 00:00:23 bad chain id = 3

2015-01-01 00:00:23 Fan check passed.

2015-01-01 00:00:23 uart_trans addr:0xf6dbb000.

2015-01-01 00:00:23 max sensor num = 4

2015-01-01 00:00:23 STATUS_INITED: soc init done!

2015-01-01 00:00:23 temperature_monitor_thread start...

2024-01-15 08:53:50 start to init...

2024-01-15 08:53:50 i2c_sim_init start

2024-01-15 08:53:50 init gpio477

2024-01-15 08:53:50 init gpio476

2024-01-15 08:53:50 i2c_sim_init end

2024-01-15 08:53:52 power open power_version = 0x78

2024-01-15 08:53:54 power is not Calibrated

2024-01-15 08:53:56 power type version: 0x0078

2024-01-15 08:53:57 disable power watchdog: 0x0000

2024-01-15 08:53:58 Enter sleep to make sure power release finish.

2024-01-15 08:54:29 Slept 30 seconds, diff = 3.

2024-01-15 08:54:33 set_voltage_by_steps to 1700.

2024-01-15 08:54:42 start up min temp by 75a = 23

2024-01-15 08:54:45 Chain[0]: find 88 asic, times 0

2024-01-15 08:54:47 Chain[1]: find 88 asic, times 0

2024-01-15 08:54:49 Chain[2]: find 88 asic, times 0

2024-01-15 08:54:54 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1

2024-01-15 08:54:59 Bring up temperature is 23

2024-01-15 08:54:59 set UART baud to 3000000

2024-01-15 08:54:59 create thread check_miner_status_thread

2024-01-15 08:54:59 create thread check_system_work_thread

2024-01-15 08:54:59 set_voltage_by_steps to 1650.

2024-01-15 08:55:01 fixed step freq_start = 50, freq_end = 675, freq_step = 6.25

2024-01-15 08:55:01 chain = 0 set freq to 56.25

2024-01-15 08:55:01 chain = 1 set freq to 56.25

2024-01-15 08:55:01 chain = 2 set freq to 56.25

2024-01-15 08:55:01 chain = 0 set freq to 62.50

2024-01-15 08:55:01 chain = 1 set freq to 62.50

2024-01-15 08:55:01 chain = 2 set freq to 62.50

2024-01-15 08:55:02 chain = 0 set freq to 68.75

2024-01-15 08:55:02 chain = 1 set freq to 68.75

2024-01-15 08:55:02 chain = 2 set freq to 68.75

2024-01-15 08:55:02 chain = 0 set freq to 75.00

2024-01-15 08:55:02 chain = 1 set freq to 75.00

2024-01-15 08:55:02 chain = 2 set freq to 75.00

2024-01-15 08:55:02 chain = 0 set freq to 81.25

2024-01-15 08:55:02 chain = 1 set freq to 81.25

2024-01-15 08:55:02 chain = 2 set freq to 81.25

2024-01-15 08:55:03 chain = 0 set freq to 87.50

2024-01-15 08:55:03 chain = 1 set freq to 87.50

2024-01-15 08:55:03 chain = 2 set freq to 87.50

2024-01-15 08:55:03 chain = 0 set freq to 93.75

2024-01-15 08:55:03 chain = 1 set freq to 93.75

2024-01-15 08:55:03 chain = 2 set freq to 93.75

2024-01-15 08:55:03 chain = 0 set freq to 100.00

2024-01-15 08:55:03 chain = 1 set freq to 100.00

2024-01-15 08:55:03 chain = 2 set freq to 100.00

2024-01-15 08:55:04 chain = 0 set freq to 106.25

2024-01-15 08:55:04 chain = 1 set freq to 106.25

2024-01-15 08:55:04 chain = 2 set freq to 106.25

2024-01-15 08:55:04 chain = 0 set freq to 112.50

2024-01-15 08:55:04 chain = 1 set freq to 112.50

2024-01-15 08:55:04 chain = 2 set freq to 112.50

2024-01-15 08:55:04 chain = 0 set freq to 118.75

2024-01-15 08:55:04 chain = 1 set freq to 118.75

2024-01-15 08:55:04 chain = 2 set freq to 118.75

2024-01-15 08:55:04 chain = 0 set freq to 125.00

2024-01-15 08:55:04 chain = 1 set freq to 125.00

2024-01-15 08:55:04 chain = 2 set freq to 125.00

2024-01-15 08:55:05 chain = 0 set freq to 131.25

2024-01-15 08:55:05 chain = 1 set freq to 131.25

2024-01-15 08:55:05 chain = 2 set freq to 131.25

2024-01-15 08:55:05 chain = 0 set freq to 137.50

2024-01-15 08:55:05 chain = 1 set freq to 137.50

2024-01-15 08:55:05 chain = 2 set freq to 137.50

2024-01-15 08:55:05 chain = 0 set freq to 143.75

2024-01-15 08:55:05 chain = 1 set freq to 143.75

2024-01-15 08:55:05 chain = 2 set freq to 143.75

2024-01-15 08:55:06 chain = 0 set freq to 150.00

2024-01-15 08:55:06 chain = 1 set freq to 150.00

2024-01-15 08:55:06 chain = 2 set freq to 150.00

2024-01-15 08:55:06 chain = 0 set freq to 156.25

2024-01-15 08:55:06 chain = 1 set freq to 156.25

2024-01-15 08:55:06 chain = 2 set freq to 156.25

2024-01-15 08:55:06 chain = 0 set freq to 162.50

2024-01-15 08:55:06 chain = 1 set freq to 162.50

2024-01-15 08:55:06 chain = 2 set freq to 162.50

2024-01-15 08:55:07 chain = 0 set freq to 168.75

2024-01-15 08:55:07 chain = 1 set freq to 168.75

2024-01-15 08:55:07 chain = 2 set freq to 168.75

2024-01-15 08:55:07 chain = 0 set freq to 175.00

2024-01-15 08:55:07 chain = 1 set freq to 175.00

2024-01-15 08:55:07 chain = 2 set freq to 175.00

2024-01-15 08:55:07 chain = 0 set freq to 181.25

2024-01-15 08:55:07 chain = 1 set freq to 181.25

2024-01-15 08:55:07 chain = 2 set freq to 181.25

2024-01-15 08:55:07 chain = 0 set freq to 187.50

2024-01-15 08:55:07 chain = 1 set freq to 187.50

2024-01-15 08:55:07 chain = 2 set freq to 187.50

2024-01-15 08:55:08 chain = 0 set freq to 193.75

2024-01-15 08:55:08 chain = 1 set freq to 193.75

2024-01-15 08:55:08 chain = 2 set freq to 193.75

2024-01-15 08:55:08 chain = 0 set freq to 200.00

2024-01-15 08:55:08 chain = 1 set freq to 200.00

2024-01-15 08:55:08 chain = 2 set freq to 200.00

2024-01-15 08:55:08 chain = 0 set freq to 206.25

2024-01-15 08:55:08 chain = 1 set freq to 206.25

2024-01-15 08:55:08 chain = 2 set freq to 206.25

2024-01-15 08:55:09 chain = 0 set freq to 212.50

2024-01-15 08:55:09 chain = 1 set freq to 212.50

2024-01-15 08:55:09 chain = 2 set freq to 212.50

2024-01-15 08:55:09 chain = 0 set freq to 218.75

2024-01-15 08:55:09 chain = 1 set freq to 218.75

2024-01-15 08:55:09 chain = 2 set freq to 218.75

2024-01-15 08:55:09 chain = 0 set freq to 225.00

2024-01-15 08:55:09 chain = 1 set freq to 225.00

2024-01-15 08:55:09 chain = 2 set freq to 225.00

2024-01-15 08:55:10 chain = 0 set freq to 231.25

2024-01-15 08:55:10 chain = 1 set freq to 231.25

2024-01-15 08:55:10 chain = 2 set freq to 231.25

2024-01-15 08:55:10 chain = 0 set freq to 237.50

2024-01-15 08:55:10 chain = 1 set freq to 237.50

2024-01-15 08:55:10 chain = 2 set freq to 237.50

2024-01-15 08:55:10 chain = 0 set freq to 243.75

2024-01-15 08:55:10 chain = 1 set freq to 243.75

2024-01-15 08:55:10 chain = 2 set freq to 243.75

2024-01-15 08:55:11 chain = 0 set freq to 250.00

2024-01-15 08:55:11 chain = 1 set freq to 250.00

2024-01-15 08:55:11 chain = 2 set freq to 250.00

2024-01-15 08:55:11 chain = 0 set freq to 256.25

2024-01-15 08:55:11 chain = 1 set freq to 256.25

2024-01-15 08:55:11 chain = 2 set freq to 256.25

2024-01-15 08:55:11 chain = 0 set freq to 262.50

2024-01-15 08:55:11 chain = 1 set freq to 262.50

2024-01-15 08:55:11 chain = 2 set freq to 262.50

2024-01-15 08:55:11 chain = 0 set freq to 268.75

2024-01-15 08:55:11 chain = 1 set freq to 268.75

2024-01-15 08:55:11 chain = 2 set freq to 268.75

2024-01-15 08:55:12 chain = 0 set freq to 275.00

2024-01-15 08:55:12 chain = 1 set freq to 275.00

2024-01-15 08:55:12 chain = 2 set freq to 275.00

2024-01-15 08:55:12 chain = 0 set freq to 281.25

2024-01-15 08:55:12 chain = 1 set freq to 281.25

2024-01-15 08:55:12 chain = 2 set freq to 281.25

2024-01-15 08:55:12 chain = 0 set freq to 287.50

2024-01-15 08:55:12 chain = 1 set freq to 287.50

2024-01-15 08:55:12 chain = 2 set freq to 287.50

2024-01-15 08:55:13 chain = 0 set freq to 293.75

2024-01-15 08:55:13 chain = 1 set freq to 293.75

2024-01-15 08:55:13 chain = 2 set freq to 293.75

2024-01-15 08:55:13 chain = 0 set freq to 300.00

2024-01-15 08:55:13 chain = 1 set freq to 300.00

2024-01-15 08:55:13 chain = 2 set freq to 300.00

2024-01-15 08:55:13 chain = 0 set freq to 306.25

2024-01-15 08:55:13 chain = 1 set freq to 306.25

2024-01-15 08:55:13 chain = 2 set freq to 306.25

2024-01-15 08:55:14 chain = 0 set freq to 312.50

2024-01-15 08:55:14 chain = 1 set freq to 312.50

2024-01-15 08:55:14 chain = 2 set freq to 312.50

2024-01-15 08:55:14 chain = 0 set freq to 318.75

2024-01-15 08:55:14 chain = 1 set freq to 318.75

2024-01-15 08:55:14 chain = 2 set freq to 318.75

2024-01-15 08:55:14 chain = 0 set freq to 325.00

2024-01-15 08:55:14 chain = 1 set freq to 325.00

2024-01-15 08:55:14 chain = 2 set freq to 325.00

2024-01-15 08:55:14 chain = 0 set freq to 331.25

2024-01-15 08:55:14 chain = 1 set freq to 331.25

2024-01-15 08:55:14 chain = 2 set freq to 331.25

2024-01-15 08:55:15 chain = 0 set freq to 337.50

2024-01-15 08:55:15 chain = 1 set freq to 337.50

2024-01-15 08:55:15 chain = 2 set freq to 337.50

2024-01-15 08:55:15 chain = 0 set freq to 343.75

2024-01-15 08:55:15 chain = 1 set freq to 343.75

2024-01-15 08:55:15 chain = 2 set freq to 343.75

2024-01-15 08:55:15 chain = 0 set freq to 350.00

2024-01-15 08:55:15 chain = 1 set freq to 350.00

2024-01-15 08:55:15 chain = 2 set freq to 350.00

2024-01-15 08:55:16 chain = 0 set freq to 356.25

2024-01-15 08:55:16 chain = 1 set freq to 356.25

2024-01-15 08:55:16 chain = 2 set freq to 356.25

2024-01-15 08:55:16 chain = 0 set freq to 362.50

2024-01-15 08:55:16 chain = 1 set freq to 362.50

2024-01-15 08:55:16 chain = 2 set freq to 362.50

2024-01-15 08:55:16 chain = 0 set freq to 368.75

2024-01-15 08:55:16 chain = 1 set freq to 368.75

2024-01-15 08:55:16 chain = 2 set freq to 368.75

2024-01-15 08:55:17 chain = 0 set freq to 375.00

2024-01-15 08:55:17 chain = 1 set freq to 375.00

2024-01-15 08:55:17 chain = 2 set freq to 375.00

2024-01-15 08:55:17 chain = 0 set freq to 381.25

2024-01-15 08:55:17 chain = 1 set freq to 381.25

2024-01-15 08:55:17 chain = 2 set freq to 381.25

2024-01-15 08:55:17 chain = 0 set freq to 387.50

2024-01-15 08:55:17 chain = 1 set freq to 387.50

2024-01-15 08:55:17 chain = 2 set freq to 387.50

2024-01-15 08:55:17 chain = 0 set freq to 393.75

2024-01-15 08:55:17 chain = 1 set freq to 393.75

2024-01-15 08:55:17 chain = 2 set freq to 393.75

2024-01-15 08:55:18 chain = 0 set freq to 400.00

2024-01-15 08:55:18 chain = 1 set freq to 400.00

2024-01-15 08:55:18 chain = 2 set freq to 400.00

2024-01-15 08:55:18 chain = 0 set freq to 406.25

2024-01-15 08:55:18 chain = 1 set freq to 406.25

2024-01-15 08:55:18 chain = 2 set freq to 406.25

2024-01-15 08:55:18 chain = 0 set freq to 412.50

2024-01-15 08:55:18 chain = 1 set freq to 412.50

2024-01-15 08:55:18 chain = 2 set freq to 412.50

2024-01-15 08:55:19 chain = 0 set freq to 418.75

2024-01-15 08:55:19 chain = 1 set freq to 418.75

2024-01-15 08:55:19 chain = 2 set freq to 418.75

2024-01-15 08:55:19 chain = 0 set freq to 425.00

2024-01-15 08:55:19 chain = 1 set freq to 425.00

2024-01-15 08:55:19 chain = 2 set freq to 425.00

2024-01-15 08:55:19 chain = 0 set freq to 431.25

2024-01-15 08:55:19 chain = 1 set freq to 431.25

2024-01-15 08:55:19 chain = 2 set freq to 431.25

2024-01-15 08:55:20 chain = 0 set freq to 437.50

2024-01-15 08:55:20 chain = 1 set freq to 437.50

2024-01-15 08:55:20 chain = 2 set freq to 437.50

2024-01-15 08:55:20 chain = 0 set freq to 443.75

2024-01-15 08:55:20 chain = 1 set freq to 443.75

2024-01-15 08:55:20 chain = 2 set freq to 443.75

2024-01-15 08:55:20 chain = 0 set freq to 450.00

2024-01-15 08:55:20 chain = 1 set freq to 450.00

2024-01-15 08:55:20 chain = 2 set freq to 450.00

2024-01-15 08:55:20 chain = 0 set freq to 456.25

2024-01-15 08:55:20 chain = 1 set freq to 456.25

2024-01-15 08:55:20 chain = 2 set freq to 456.25

2024-01-15 08:55:21 chain = 0 set freq to 462.50

2024-01-15 08:55:21 chain = 1 set freq to 462.50

2024-01-15 08:55:21 chain = 2 set freq to 462.50

2024-01-15 08:55:21 chain = 0 set freq to 468.75

2024-01-15 08:55:21 chain = 1 set freq to 468.75

2024-01-15 08:55:21 chain = 2 set freq to 468.75

2024-01-15 08:55:21 chain = 0 set freq to 475.00

2024-01-15 08:55:21 chain = 1 set freq to 475.00

2024-01-15 08:55:21 chain = 2 set freq to 475.00

2024-01-15 08:55:22 chain = 0 set freq to 481.25

2024-01-15 08:55:22 chain = 1 set freq to 481.25

2024-01-15 08:55:22 chain = 2 set freq to 481.25

2024-01-15 08:55:22 chain = 0 set freq to 487.50

2024-01-15 08:55:22 chain = 1 set freq to 487.50

2024-01-15 08:55:22 chain = 2 set freq to 487.50

2024-01-15 08:55:22 chain = 0 set freq to 493.75

2024-01-15 08:55:22 chain = 1 set freq to 493.75

2024-01-15 08:55:22 chain = 2 set freq to 493.75

2024-01-15 08:55:23 chain = 0 set freq to 500.00

2024-01-15 08:55:23 chain = 1 set freq to 500.00

2024-01-15 08:55:23 chain = 2 set freq to 500.00

2024-01-15 08:55:23 chain = 0 set freq to 506.25

2024-01-15 08:55:23 chain = 1 set freq to 506.25

2024-01-15 08:55:23 chain = 2 set freq to 506.25

2024-01-15 08:55:23 chain = 0 set freq to 512.50

2024-01-15 08:55:23 chain = 1 set freq to 512.50

2024-01-15 08:55:23 chain = 2 set freq to 512.50

2024-01-15 08:55:23 chain = 0 set freq to 518.75

2024-01-15 08:55:23 chain = 1 set freq to 518.75

2024-01-15 08:55:23 chain = 2 set freq to 518.75

2024-01-15 08:55:24 chain = 0 set freq to 525.00

2024-01-15 08:55:24 chain = 1 set freq to 525.00

2024-01-15 08:55:24 chain = 2 set freq to 525.00

2024-01-15 08:55:24 chain = 0 set freq to 531.25

2024-01-15 08:55:24 chain = 1 set freq to 531.25

2024-01-15 08:55:24 chain = 2 set freq to 531.25

2024-01-15 08:55:24 chain = 0 set freq to 537.50

2024-01-15 08:55:24 chain = 1 set freq to 537.50

2024-01-15 08:55:24 chain = 2 set freq to 537.50

2024-01-15 08:55:25 chain = 0 set freq to 543.75

2024-01-15 08:55:25 chain = 1 set freq to 543.75

2024-01-15 08:55:25 chain = 2 set freq to 543.75

2024-01-15 08:55:25 chain = 0 set freq to 550.00

2024-01-15 08:55:25 chain = 1 set freq to 550.00

2024-01-15 08:55:25 chain = 2 set freq to 550.00

2024-01-15 08:55:25 chain = 0 set freq to 556.25

2024-01-15 08:55:25 chain = 1 set freq to 556.25

2024-01-15 08:55:25 chain = 2 set freq to 556.25

2024-01-15 08:55:26 chain = 0 set freq to 562.50

2024-01-15 08:55:26 chain = 1 set freq to 562.50

2024-01-15 08:55:26 chain = 2 set freq to 562.50

2024-01-15 08:55:26 chain = 0 set freq to 568.75

2024-01-15 08:55:26 chain = 1 set freq to 568.75

2024-01-15 08:55:26 chain = 2 set freq to 568.75

2024-01-15 08:55:26 chain = 0 set freq to 575.00

2024-01-15 08:55:26 chain = 1 set freq to 575.00

2024-01-15 08:55:26 chain = 2 set freq to 575.00

2024-01-15 08:55:26 chain = 0 set freq to 581.25

2024-01-15 08:55:26 chain = 1 set freq to 581.25

2024-01-15 08:55:26 chain = 2 set freq to 581.25

2024-01-15 08:55:27 chain = 0 set freq to 587.50

2024-01-15 08:55:27 chain = 1 set freq to 587.50

2024-01-15 08:55:27 chain = 2 set freq to 587.50

2024-01-15 08:55:27 chain = 0 set freq to 593.75

2024-01-15 08:55:27 chain = 1 set freq to 593.75

2024-01-15 08:55:27 chain = 2 set freq to 593.75

2024-01-15 08:55:27 chain = 0 set freq to 600.00

2024-01-15 08:55:27 chain = 1 set freq to 600.00

2024-01-15 08:55:27 chain = 2 set freq to 600.00

2024-01-15 08:55:28 chain = 0 set freq to 606.25

2024-01-15 08:55:28 chain = 1 set freq to 606.25

2024-01-15 08:55:28 chain = 2 set freq to 606.25

2024-01-15 08:55:28 chain = 0 set freq to 612.50

2024-01-15 08:55:28 chain = 1 set freq to 612.50

2024-01-15 08:55:28 chain = 2 set freq to 612.50

2024-01-15 08:55:28 chain = 0 set freq to 618.75

2024-01-15 08:55:28 chain = 1 set freq to 618.75

2024-01-15 08:55:28 chain = 2 set freq to 618.75

2024-01-15 08:55:29 chain = 0 set freq to 625.00

2024-01-15 08:55:29 chain = 1 set freq to 625.00

2024-01-15 08:55:29 chain = 2 set freq to 625.00

2024-01-15 08:55:29 chain = 0 set freq to 631.25

2024-01-15 08:55:29 chain = 1 set freq to 631.25

2024-01-15 08:55:29 chain = 2 set freq to 631.25

2024-01-15 08:55:29 chain = 0 set freq to 637.50

2024-01-15 08:55:29 chain = 1 set freq to 637.50

2024-01-15 08:55:29 chain = 2 set freq to 637.50

2024-01-15 08:55:30 chain = 0 set freq to 643.75

2024-01-15 08:55:30 chain = 1 set freq to 643.75

2024-01-15 08:55:30 chain = 2 set freq to 643.75

2024-01-15 08:55:30 chain = 0 set freq to 650.00

2024-01-15 08:55:30 chain = 1 set freq to 650.00

2024-01-15 08:55:30 chain = 2 set freq to 650.00

2024-01-15 08:55:30 chain = 0 set freq to 656.25

2024-01-15 08:55:30 chain = 1 set freq to 656.25

2024-01-15 08:55:30 chain = 2 set freq to 656.25

2024-01-15 08:55:30 chain = 0 set freq to 662.50

2024-01-15 08:55:30 chain = 1 set freq to 662.50

2024-01-15 08:55:30 chain = 2 set freq to 662.50

2024-01-15 08:55:31 chain = 0 set freq to 668.75

2024-01-15 08:55:31 chain = 1 set freq to 668.75

2024-01-15 08:55:31 chain = 2 set freq to 668.75

2024-01-15 08:55:31 chain = 0 set freq to 675.00

2024-01-15 08:55:31 chain = 1 set freq to 675.00

2024-01-15 08:55:31 chain = 2 set freq to 675.00

2024-01-15 08:55:31 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1

2024-01-15 08:55:31 start do_core_reset

2024-01-15 08:55:45 end do_core_reset

2024-01-15 08:55:55 set_voltage_by_steps to 1580.

2024-01-15 08:55:57 create thread pic_heart_beat_thread

2024-01-15 08:55:57 Init done!

2024-01-15 08:55:57 STATUS_OKAY

2024-01-15 08:55:57 start the cached job

2024-01-15 08:55:57 Version num 65536

2024-01-15 08:55:57 Mask num 0x1fffe000

2024-01-15 08:55:57 opt_multi_version = 65536, interval timeout = 2290648

2024-01-15 08:55:57 freq = 675, percent = 90, hcn = 3883, timeout = 2290648

2024-01-15 08:55:57 set_start_time_point total_tv_start_sys=149 total_tv_end_sys=150

2024-01-15 08:55:58 enable power watchdog: 0x0001

2024-01-15 09:25:10 30m avg rate is 91073.37 in 29 mins

2024-01-15 09:55:12 30m avg rate is 91685.12 in 30 mins

2024-01-15 10:25:15 30m avg rate is 91875.12 in 30 mins

2024-01-15 10:55:17 30m avg rate is 91631.66 in 30 mins

2024-01-15 11:25:20 30m avg rate is 91447.29 in 30 mins

2024-01-15 11:55:22 30m avg rate is 91872.07 in 30 mins

2024-01-15 12:25:24 30m avg rate is 91702.20 in 30 mins

2024-01-15 12:55:27 30m avg rate is 91642.04 in 30 mins

2024-01-15 13:25:29 30m avg rate is 91993.69 in 30 mins

2024-01-15 13:55:32 30m avg rate is 92128.95 in 30 mins

2024-01-15 14:25:34 30m avg rate is 91738.44 in 30 mins

2024-01-15 14:53:09 !!! reg crc error

2024-01-15 14:53:48 set_voltage_by_steps to 1592.

2024-01-15 14:54:09 set_voltage_by_steps to 1604.

2024-01-15 14:54:40 set_voltage_by_steps to 1616.

2024-01-15 14:55:36 30m avg rate is 84176.37 in 30 mins

2024-01-15 14:55:53 set_voltage_by_steps to 1628.

2024-01-15 14:59:24 set_voltage_by_steps to 1640.

2024-01-15 15:10:38 chain 0 hash rate 0.00 low in 15 mins

2024-01-15 15:10:38 chain 1 hash rate 0.00 low in 15 mins

2024-01-15 15:10:38 chain 2 hash rate 0.00 low in 15 mins

2024-01-15 15:25:39 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 15:25:39 30m avg rate is 0.00 in 30 mins

2024-01-15 15:41:57 set_voltage_by_steps to 1652.

2024-01-15 15:55:41 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 15:55:41 30m avg rate is 0.00 in 30 mins

2024-01-15 16:25:44 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 16:25:44 30m avg rate is 0.00 in 30 mins

2024-01-15 16:55:46 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 16:55:46 30m avg rate is 0.00 in 30 mins

2024-01-15 17:25:49 avg rate is lower than ideal rate, 0.00 in 30 mins

2024-01-15 17:25:49 30m avg rate is 0.00 in 30 mins

2024-01-15 17:38:21 set_voltage_by_steps to 1664.