Умельцы или кто уже разобрался, как настроить майнинг без пула по этой статье, у меня к серверу никак не может подключиться...
If you have a single rig the process is pretty simple.
Here is how you would do it on windows. If you are using linux the process is probably similar.
Download gubiq here: https://github.com/u...o-ubiq/releases Get one for windows.
Make a batch file that is in same dir as gubiq. Batch file should contain: gubiq-windows-4.0-amd64 --rpc --etherbase <your ubiq address>
Execute batch file (double click on it) and a console window will open and block synchronization will begin. You must wait until the block chain is completely synced before mining. you will know when it shows importing single blocks.
Start claymore. Batch file for claymore should have this: EthDcrMiner64.exe -epool http://127.0.0.1:8588-allcoins 1
In case you haven't figured this out you will have two console windows open at the same time. One for gubiq and one for claymore. Both must stay open. If you don't know how to make a batch file use notepad++. Make new file, add parameters from above, and when saving change type drop down to batch. Another tip is that you can right click on your batch file and select Create Shortcut. Then drag created shortcut to desktop.
